Update input-leap installation instructions

dist-kernel 6.6.58
sys-kernel/libre-kernel: 6.6.58
2024-11-07 09:20:09 +01:00 · 2024-11-02 19:45:32 +01:00 · 2024-11-02 19:42:28 +01:00 · 2024-10-04 13:25:13 +02:00 · 2024-10-04 12:52:12 +02:00 · 2024-10-02 08:34:12 +02:00
62 changed files with 6545 additions and 55 deletions
--- a/.gitignore
+++ b/.gitignore
@ -0,0 +1,2 @@
+metadata/md5-cache
+profile/use.local.desc
--- a/README.md
+++ b/README.md
@ -0,0 +1,92 @@
+Personal Gentoo overlay, focusing mostly on needed tools and
+compatibility for a libre version of Gentoo on the Librem 14 computer. A
+handful of other pacakages are also provided.
+
+Linux-libre and Librem-related packages:
+ - **sys-kernel/libre-kernel**: A dist-kernel built from the [Linux-libre
+   sources][linux-libre].
+ - **media-fonts/fonts-meta**: Modified version to remove non-Free
+   fonts from the dependencies.
+ - **sys-kernel/librem-ec-acpi**: An ebuild packaging the [Librem 14
+    EC ACPI kernel module][ec-acpi], necessary for proper functioning
+	of the laptop's battery charging and function keys.
+ * **sys-power/librem-control**: A GTK application to control
+   parameters of the Librem EC (battery charge levels, etc).
+ * **sys-apps/purism_ectool**: Tool for querying and flashing
+   Purism EC firmware images on certain Librem laptops.v
+
+Other Packages:
+  - **x11-misc/input-leap**: Updated ebuild of input-leap
+    (Barrier/Synergy virtual KVM switch fork) that supports Wayland via
+    `libei`.
+
+## How to Add This Repository
+
+Using eselect-repository:
+
+```
+# eselect repository add projectmoon git https://git.agnos.is/projectmoon/projectmoon-overlay
+```
+
+It usually a best practice to mask packages from overlays, except the ones you want:
+
+In `/etc/portage/package.mask`:
+```
+*/*::projectmoon
+```
+
+Individual packages can be unmasked (and added to
+`package.accept_keywords` if necessary). For instructions on unmasking
+individual packages, see the relevant documentation below.
+
+## The Linux-libre dist-kernel
+
+*See [docs/Libre-Kernel.md](docs/Libre-Kernel.md).*
+
+This overlay provides a dist-kernel (based on
+`sys-kernel/vanilla-kernel`) using the Linux-libre kernel sources, and
+an accompanying updated version of `virtual/dist-kernel`. It is
+maintained and tested for my personal use on amd64. The Linux-libre
+kernel removes the ability for the Linux kernel to load firmware that is
+not [Free Software][free-software]. The ebuild roughly follows the
+current stable gentoo-kernel for amd64.
+
+## Purism Librem Computer Packages
+
+*See [docs/Librem.md](docs/Librem.md).*
+
+This overlay contains packages for Purism's Librem computers, focusing
+mostly on the Librem 14.
+
+## Input Leap
+
+*See [docs/Input-Leap.md](docs/Input-Leap.md)*
+
+This overlay contains a working, updated ebuild for Input Leap, a fork
+of Barrier (itself a fork of Synergy), which is a "virtual KVM switch",
+allowing you to share a keyboard and mouse between several computers
+over the network.
+
+The most important things about Input Leap:
+
+ - It is Maintained.
+ - It supports Wayland.
+
+## Other Packages
+
+*More documentation coming soon.*
+
+Packages must be unmasked and added to `package.accept_keywords` as
+necessary.
+
+# Disclaimer
+
+The ebuilds in this overlay are really only tested for my specific
+use-case. I do not test every combination of USE flags, for example.
+So there may be issues with non-Free dependencies etc in some cases.
+
+[linux-libre]: https://www.fsfla.org/ikiwiki/selibre/linux-libre/
+[free-software]: https://www.gnu.org/philosophy/free-sw.en.html#fs-definition
+[ec-acpi]: https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms
+[ec-instructions]: https://puri.sm/projects/librem-ec/
+[ff-pwas]: https://github.com/filips123/PWAsForFirefox
--- a/dev-libs/libportal/Manifest
+++ b/dev-libs/libportal/Manifest
@ -0,0 +1 @@
+DIST libportal-0.7.1.tar.xz 74268 BLAKE2B b519fa88735d640a74e18cc791ec69862f136b793a7c855b1f3873cf6b15626d69088747f1a7ff54f8cd96f79e82e3df31e5349e3da57906e769b8f809f4ba34 SHA512 cbc50bfd86787fffc975fc53835acc6c3c0fd54b7ee02fce1983f1bd0fc40b15a0537780cd5e943ecedcf951840080a0f55a23a96e706223e52a6144ee70332c
--- a/dev-libs/libportal/files/0001-Input-capture-support.patch
+++ b/dev-libs/libportal/files/0001-Input-capture-support.patch
--- a/dev-libs/libportal/files/6cd7c2ab82575b76f876ee2bd2d31f6cb77f022f.patch
+++ b/dev-libs/libportal/files/6cd7c2ab82575b76f876ee2bd2d31f6cb77f022f.patch
@ -0,0 +1,47 @@
+From 6cd7c2ab82575b76f876ee2bd2d31f6cb77f022f Mon Sep 17 00:00:00 2001
+From: Simon McVittie <smcv@debian.org>
+Date: Tue, 26 Dec 2023 14:35:46 +0000
+Subject: [PATCH] pyportaltest: Only create one session bus per DBusTestCase
+ subclass
+
+DBusTestCase.start_session_bus() is a class method, and can only be
+called once per class, because DBusTestCase.tearDownClass() will only
+clean up one session bus. In older versions of dbusmock, calling it more
+than once will result in dbus-daemon processes being leaked; since
+0.30.0, calling it more than once will result in an assertion failure.
+
+Resolves: https://github.com/flatpak/libportal/issues/136
+Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1058245
+Signed-off-by: Simon McVittie <smcv@debian.org>
+---
+ tests/pyportaltest/__init__.py | 10 +++++++++-
+ 1 file changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/tests/pyportaltest/__init__.py b/tests/pyportaltest/__init__.py
+index af053c2a..80f04a91 100644
+--- a/tests/pyportaltest/__init__.py
+++ b/tests/pyportaltest/__init__.py
+@@ -83,6 +83,14 @@ def setUpClass(cls):
+         except AttributeError:
+             pytest.skip("Updated version of dbusmock required")
+ 
+        cls.__have_session_bus = False
+
+    @classmethod
+    def ensure_session_bus(cls):
+        if not cls.__have_session_bus:
+            cls.__have_session_bus = True
+            cls.start_session_bus()
+
+     def setUp(self):
+         self.p_mock = None
+         self._mainloop = None
+@@ -96,7 +104,7 @@ def setup_daemon(self, params=None, extra_templates: List[Tuple[str, Dict]] = []
+         portal name as first value and the param dict to be passed to that
+         template as second value, e.g. ("ScreenCast", {...}).
+         """
+-        self.start_session_bus()
+        self.ensure_session_bus()
+         self.p_mock, self.obj_portal = self.spawn_server_template(
+             template=f"pyportaltest/templates/{self.PORTAL_NAME.lower()}.py",
+             parameters=params,
--- a/dev-libs/libportal/libportal-0.7.1-r1.ebuild
+++ b/dev-libs/libportal/libportal-0.7.1-r1.ebuild
@ -0,0 +1,118 @@
+# Copyright 2022-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{10..12} )
+inherit flag-o-matic meson python-any-r1 vala virtualx
+
+DESCRIPTION="Flatpak portal library"
+HOMEPAGE="https://github.com/flatpak/libportal"
+SRC_URI="https://github.com/flatpak/libportal/releases/download/${PV}/${P}.tar.xz"
+
+LICENSE="LGPL-3"
+SLOT="0/1-1-1-1" # soname of libportal{,-gtk3,-gtk4,-qt5}.so
+KEYWORDS="~alpha amd64 ~arm arm64 ~ia64 ~loong ~ppc ~ppc64 ~riscv ~sparc x86"
+IUSE="gtk gtk-doc +introspection qt5 test +vala wayland X"
+RESTRICT="!test? ( test )"
+REQUIRED_USE="
+	gtk-doc? ( introspection )
+	vala? ( introspection )
+"
+
+RDEPEND="
+	>=dev-libs/glib-2.58:2
+	introspection? ( dev-libs/gobject-introspection:= )
+	gtk? (
+		>=x11-libs/gtk+-3.24.41-r1:3[X?,wayland?]
+		>=gui-libs/gtk-4.12.5-r2:4[X?,wayland?]
+	)
+	qt5? (
+		dev-qt/qtcore:=
+		dev-qt/qtgui:=
+		dev-qt/qtx11extras:=
+		dev-qt/qtwidgets:=
+	)
+"
+DEPEND="${RDEPEND}
+	qt5? (
+		test? ( dev-qt/qttest:= )
+	)
+"
+BDEPEND="
+	dev-util/glib-utils
+	virtual/pkgconfig
+	gtk-doc? ( dev-util/gi-docgen )
+	qt5? (
+		test? ( dev-qt/linguist-tools )
+	)
+	test? (
+		${PYTHON_DEPS}
+		$(python_gen_any_dep '
+			dev-python/pytest[${PYTHON_USEDEP}]
+			dev-python/dbus-python[${PYTHON_USEDEP}]
+			dev-python/python-dbusmock[${PYTHON_USEDEP}]
+		')
+	)
+	vala? ( $(vala_depend) )
+"
+
+PATCHES=(
+	# backport fix for tests incompatibility with dbusmock 0.30.0
+	"${FILESDIR}"/6cd7c2ab82575b76f876ee2bd2d31f6cb77f022f.patch
+)
+
+python_check_deps() {
+	python_has_version \
+		"dev-python/pytest[${PYTHON_USEDEP}]" \
+		"dev-python/dbus-python[${PYTHON_USEDEP}]" \
+		"dev-python/python-dbusmock[${PYTHON_USEDEP}]"
+}
+
+pkg_setup() {
+	if use test; then
+		python-any-r1_pkg_setup
+	fi
+}
+
+src_prepare() {
+	default
+	vala_setup
+}
+
+src_configure() {
+	# defang automagic dependencies
+	use wayland || append-cflags -DGENTOO_GTK_HIDE_WAYLAND
+	use X || append-cflags -DGENTOO_GTK_HIDE_X11
+
+	local emesonargs=(
+		$(meson_feature gtk backend-gtk3)
+		$(meson_feature gtk backend-gtk4)
+		$(meson_feature qt5 backend-qt5)
+		-Dportal-tests=false
+		$(meson_use introspection)
+		$(meson_use vala vapi)
+		$(meson_use gtk-doc docs)
+		$(meson_use test tests)
+	)
+	meson_src_configure
+}
+
+src_test() {
+	# Tests only exist for Qt5
+	if use qt5; then
+		virtx meson_src_test
+	else
+		# run meson_src_test to notice if tests are added
+		meson_src_test
+	fi
+}
+
+src_install() {
+	meson_src_install
+
+	if use gtk-doc; then
+		mkdir -p "${ED}"/usr/share/gtk-doc/html/ || die
+		mv "${ED}"/usr/share/doc/${PN}-1 "${ED}"/usr/share/gtk-doc/html/ || die
+	fi
+}
--- a/dev-libs/libportal/libportal-0.7.1-r2.ebuild
+++ b/dev-libs/libportal/libportal-0.7.1-r2.ebuild
@ -0,0 +1,121 @@
+# Copyright 2022-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{10..12} )
+inherit flag-o-matic meson python-any-r1 vala virtualx
+
+DESCRIPTION="Flatpak portal library"
+HOMEPAGE="https://github.com/flatpak/libportal"
+SRC_URI="https://github.com/flatpak/libportal/releases/download/${PV}/${P}.tar.xz"
+
+LICENSE="LGPL-3"
+SLOT="0/1-1-1-1" # soname of libportal{,-gtk3,-gtk4,-qt5}.so
+KEYWORDS="~alpha amd64 ~arm arm64 ~ia64 ~loong ~ppc ~ppc64 ~riscv ~sparc x86"
+IUSE="gtk gtk-doc +introspection inputcapture qt5 test +vala wayland X"
+RESTRICT="!test? ( test )"
+REQUIRED_USE="
+	gtk-doc? ( introspection )
+	vala? ( introspection )
+"
+
+RDEPEND="
+	>=dev-libs/glib-2.58:2
+	introspection? ( dev-libs/gobject-introspection:= )
+	gtk? (
+		>=x11-libs/gtk+-3.24.41-r1:3[X?,wayland?]
+		>=gui-libs/gtk-4.12.5-r2:4[X?,wayland?]
+	)
+	qt5? (
+		dev-qt/qtcore:=
+		dev-qt/qtgui:=
+		dev-qt/qtx11extras:=
+		dev-qt/qtwidgets:=
+	)
+"
+DEPEND="${RDEPEND}
+	qt5? (
+		test? ( dev-qt/qttest:= )
+	)
+"
+BDEPEND="
+	dev-util/glib-utils
+	virtual/pkgconfig
+	gtk-doc? ( dev-util/gi-docgen )
+	qt5? (
+		test? ( dev-qt/linguist-tools )
+	)
+	test? (
+		${PYTHON_DEPS}
+		$(python_gen_any_dep '
+			dev-python/pytest[${PYTHON_USEDEP}]
+			dev-python/dbus-python[${PYTHON_USEDEP}]
+			dev-python/python-dbusmock[${PYTHON_USEDEP}]
+		')
+	)
+	vala? ( $(vala_depend) )
+"
+
+PATCHES=(
+	# backport fix for tests incompatibility with dbusmock 0.30.0
+	"${FILESDIR}"/6cd7c2ab82575b76f876ee2bd2d31f6cb77f022f.patch
+)
+
+python_check_deps() {
+	python_has_version \
+		"dev-python/pytest[${PYTHON_USEDEP}]" \
+		"dev-python/dbus-python[${PYTHON_USEDEP}]" \
+		"dev-python/python-dbusmock[${PYTHON_USEDEP}]"
+}
+
+pkg_setup() {
+	if use test; then
+		python-any-r1_pkg_setup
+	fi
+}
+
+src_prepare() {
+	default
+	if use inputcapture; then
+		eapply "${FILESDIR}"/0001-Input-capture-support.patch
+	fi
+	vala_setup
+}
+
+src_configure() {
+	# defang automagic dependencies
+	use wayland || append-cflags -DGENTOO_GTK_HIDE_WAYLAND
+	use X || append-cflags -DGENTOO_GTK_HIDE_X11
+
+	local emesonargs=(
+		$(meson_feature gtk backend-gtk3)
+		$(meson_feature gtk backend-gtk4)
+		$(meson_feature qt5 backend-qt5)
+		-Dportal-tests=false
+		$(meson_use introspection)
+		$(meson_use vala vapi)
+		$(meson_use gtk-doc docs)
+		$(meson_use test tests)
+	)
+	meson_src_configure
+}
+
+src_test() {
+	# Tests only exist for Qt5
+	if use qt5; then
+		virtx meson_src_test
+	else
+		# run meson_src_test to notice if tests are added
+		meson_src_test
+	fi
+}
+
+src_install() {
+	meson_src_install
+
+	if use gtk-doc; then
+		mkdir -p "${ED}"/usr/share/gtk-doc/html/ || die
+		mv "${ED}"/usr/share/doc/${PN}-1 "${ED}"/usr/share/gtk-doc/html/ || die
+	fi
+}
--- a/dev-libs/libportal/libportal-0.7.1.ebuild
+++ b/dev-libs/libportal/libportal-0.7.1.ebuild
@ -0,0 +1,114 @@
+# Copyright 2022-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{10..12} )
+inherit meson python-any-r1 vala virtualx
+
+DESCRIPTION="Flatpak portal library"
+HOMEPAGE="https://github.com/flatpak/libportal"
+SRC_URI="https://github.com/flatpak/libportal/releases/download/${PV}/${P}.tar.xz"
+
+LICENSE="LGPL-3"
+SLOT="0/1-1-1-1" # soname of libportal{,-gtk3,-gtk4,-qt5}.so
+KEYWORDS="~alpha amd64 ~arm arm64 ~ia64 ~loong ~ppc ~ppc64 ~riscv ~sparc x86"
+IUSE="gtk gtk-doc +introspection qt5 test +vala"
+RESTRICT="!test? ( test )"
+REQUIRED_USE="
+	gtk-doc? ( introspection )
+	vala? ( introspection )
+"
+
+RDEPEND="
+	>=dev-libs/glib-2.58:2
+	introspection? ( dev-libs/gobject-introspection:= )
+	gtk? (
+		x11-libs/gtk+:3
+		gui-libs/gtk:4
+	)
+	qt5? (
+		dev-qt/qtcore:=
+		dev-qt/qtgui:=
+		dev-qt/qtx11extras:=
+		dev-qt/qtwidgets:=
+	)
+"
+DEPEND="${RDEPEND}
+	qt5? (
+		test? ( dev-qt/qttest:= )
+	)
+"
+BDEPEND="
+	dev-util/glib-utils
+	virtual/pkgconfig
+	gtk-doc? ( dev-util/gi-docgen )
+	qt5? (
+		test? ( dev-qt/linguist-tools )
+	)
+	test? (
+		${PYTHON_DEPS}
+		$(python_gen_any_dep '
+			dev-python/pytest[${PYTHON_USEDEP}]
+			dev-python/dbus-python[${PYTHON_USEDEP}]
+			dev-python/python-dbusmock[${PYTHON_USEDEP}]
+		')
+	)
+	vala? ( $(vala_depend) )
+"
+
+PATCHES=(
+	# backport fix for tests incompatibility with dbusmock 0.30.0
+	"${FILESDIR}"/6cd7c2ab82575b76f876ee2bd2d31f6cb77f022f.patch
+)
+
+python_check_deps() {
+	python_has_version \
+		"dev-python/pytest[${PYTHON_USEDEP}]" \
+		"dev-python/dbus-python[${PYTHON_USEDEP}]" \
+		"dev-python/python-dbusmock[${PYTHON_USEDEP}]"
+}
+
+pkg_setup() {
+	if use test; then
+		python-any-r1_pkg_setup
+	fi
+}
+
+src_prepare() {
+	default
+	vala_setup
+}
+
+src_configure() {
+	local emesonargs=(
+		$(meson_feature gtk backend-gtk3)
+		$(meson_feature gtk backend-gtk4)
+		$(meson_feature qt5 backend-qt5)
+		-Dportal-tests=false
+		$(meson_use introspection)
+		$(meson_use vala vapi)
+		$(meson_use gtk-doc docs)
+		$(meson_use test tests)
+	)
+	meson_src_configure
+}
+
+src_test() {
+	# Tests only exist for Qt5
+	if use qt5; then
+		virtx meson_src_test
+	else
+		# run meson_src_test to notice if tests are added
+		meson_src_test
+	fi
+}
+
+src_install() {
+	meson_src_install
+
+	if use gtk-doc; then
+		mkdir -p "${ED}"/usr/share/gtk-doc/html/ || die
+		mv "${ED}"/usr/share/doc/${PN}-1 "${ED}"/usr/share/gtk-doc/html/ || die
+	fi
+}
--- a/dev-libs/libportal/metadata.xml
+++ b/dev-libs/libportal/metadata.xml
@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+  <maintainer type="project">
+    <email>gnome@gentoo.org</email>
+    <name>Gentoo GNOME Desktop</name>
+  </maintainer>
+  <upstream>
+    <remote-id type="github">flatpak/libportal</remote-id>
+  </upstream>
+	<use>
+	  <flag name="inputcapture">
+        Enable not-yet-released inputcapture patches from upstream.
+      </flag>
+	</use>
+</pkgmetadata>
--- a/dev-util/rust-analyzer-bin/Manifest
+++ b/dev-util/rust-analyzer-bin/Manifest
@ -0,0 +1,2 @@
+DIST rust-analyzer-2022-12-12.gz 12848044 BLAKE2B b3c6e1b192d8db6518997b93b12551c1f43e70ca74a306395b764a73982b329712931f34932dd98f866d3e6850bd59dd533edaca8f06ca9f7b41ac6526552388 SHA512 b9d787307021a3753df7a2ef05e52aaf8b0389000770dadd326d5476ac20ef6b328741412601fb5dc467e0511911065f59bd86b5b96f5da265658c0579e54a72
+DIST rust-analyzer-x86_64-unknown-linux-gnu.gz 11550409 BLAKE2B 6d1dc7dd15375016f153d53c408f882f219778dfbeaa98e15fcb51a5f6704b29a73205c1c2ed1162ad2794387d9abc3fc569a19d243135428fc4ab6b46b9bcac SHA512 c23b2e9d645863b84e0961429c654365887f265faf883f94b62bedc4a9b8de25c00cc3e1653d614f485bebb9cbe4abb241072955d8d46bdc082795d597285422
--- a/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20210719.ebuild
+++ b/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20210719.ebuild
@ -0,0 +1,31 @@
+# Copyright 2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+DESCRIPTION="An implementation of Language Server Protocol for the Rust programming language"
+HOMEPAGE="https://rust-analyzer.github.io"
+KEYWORDS="~amd64"
+
+# rust-analyzer makes date-based releases at the moment.
+DATE=${PV:3:8}
+YEAR=${DATE:0:4}
+MONTH=${DATE:4:2}
+DAY=${DATE:6:2}
+VERSION="${YEAR}-${MONTH}-${DAY}"
+
+SRC_URI="https://github.com/rust-analyzer/rust-analyzer/releases/download/${VERSION}/rust-analyzer-x86_64-unknown-linux-gnu.gz"
+
+LICENSE="Apache-2.0 MIT-with-advertising"
+SLOT="0"
+PROPERTIES="live"
+
+S=${WORKDIR}
+
+src_install() {
+	newbin rust-analyzer-x86_64-unknown-linux-gnu rust-analyzer
+}
+
+pkg_postinst() {
+	elog "Make sure to add your desired rust toolchain (e.g. with rustup) for rust-analyzer to work correctly"
+}
--- a/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20210802.ebuild
+++ b/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20210802.ebuild
@ -0,0 +1,30 @@
+# Copyright 2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+DESCRIPTION="An implementation of Language Server Protocol for the Rust programming language"
+HOMEPAGE="https://rust-analyzer.github.io"
+KEYWORDS="~amd64"
+
+# rust-analyzer makes date-based releases at the moment.
+DATE=${PV:3:8}
+YEAR=${DATE:0:4}
+MONTH=${DATE:4:2}
+DAY=${DATE:6:2}
+VERSION="${YEAR}-${MONTH}-${DAY}"
+
+SRC_URI="https://github.com/rust-analyzer/rust-analyzer/releases/download/${VERSION}/rust-analyzer-x86_64-unknown-linux-gnu.gz"
+LICENSE="Apache-2.0 MIT-with-advertising"
+SLOT="0"
+PROPERTIES="live"
+
+S=${WORKDIR}
+
+src_install() {
+	newbin rust-analyzer-x86_64-unknown-linux-gnu rust-analyzer
+}
+
+pkg_postinst() {
+	elog "Make sure to add your desired rust toolchain (e.g. with rustup) for rust-analyzer to work correctly"
+}
--- a/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20210927.ebuild
+++ b/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20210927.ebuild
@ -0,0 +1,30 @@
+# Copyright 2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+DESCRIPTION="An implementation of Language Server Protocol for the Rust programming language"
+HOMEPAGE="https://rust-analyzer.github.io"
+KEYWORDS="~amd64"
+
+# rust-analyzer makes date-based releases at the moment.
+DATE=${PV:3:8}
+YEAR=${DATE:0:4}
+MONTH=${DATE:4:2}
+DAY=${DATE:6:2}
+VERSION="${YEAR}-${MONTH}-${DAY}"
+
+SRC_URI="https://github.com/rust-analyzer/rust-analyzer/releases/download/${VERSION}/rust-analyzer-x86_64-unknown-linux-gnu.gz"
+LICENSE="Apache-2.0 MIT-with-advertising"
+SLOT="0"
+PROPERTIES="live"
+
+S=${WORKDIR}
+
+src_install() {
+	newbin rust-analyzer-x86_64-unknown-linux-gnu rust-analyzer
+}
+
+pkg_postinst() {
+	elog "Make sure to add your desired rust toolchain (e.g. with rustup) for rust-analyzer to work correctly"
+}
--- a/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20221212.ebuild
+++ b/dev-util/rust-analyzer-bin/rust-analyzer-bin-0_p20221212.ebuild
@ -0,0 +1,30 @@
+# Copyright 2021-2022 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+DESCRIPTION="An implementation of Language Server Protocol for the Rust programming language"
+HOMEPAGE="https://rust-analyzer.github.io"
+KEYWORDS="~amd64"
+
+# rust-analyzer makes date-based releases at the moment.
+DATE=${PV:3:8}
+YEAR=${DATE:0:4}
+MONTH=${DATE:4:2}
+DAY=${DATE:6:2}
+VERSION="${YEAR}-${MONTH}-${DAY}"
+
+SRC_URI="https://github.com/rust-analyzer/rust-analyzer/releases/download/${VERSION}/rust-analyzer-x86_64-unknown-linux-gnu.gz -> rust-analyzer-${VERSION}.gz"
+LICENSE="Apache-2.0 MIT-with-advertising"
+SLOT="0"
+PROPERTIES="live"
+
+S=${WORKDIR}
+
+src_install() {
+	newbin "rust-analyzer-${VERSION}" rust-analyzer
+}
+
+pkg_postinst() {
+	elog "Make sure to add your desired rust toolchain (e.g. with rustup) for rust-analyzer to work correctly"
+}
--- a/docs/Input-Leap.md
+++ b/docs/Input-Leap.md
@ -0,0 +1,76 @@
+# Input Leap
+
+This overlay has a working, updated version of Input Leap, a fork of
+Barrier (itself a fork of Synergy), which is a "virtual KVM switch",
+allowing you to share a keyboard and mouse between several computers
+over the network.
+
+The most important things about Input Leap:
+ - Maintained.
+ - Supports Wayland.
+
+## Project Status
+
+Input Leap is technically alpha quality, because it does not yet have a
+stable release. Thus, the ebuild is a `9999` version ebuild.
+
+Building from `HEAD` is highly unstable and _NOT_ recommended. See below.
+
+## Setup
+
+To use this overlay's version of Input Leap, unmask the following packages:
+
+```
+dev-libs/libportal::projectmoon
+x11-misc/input-leap::projectmoon
+```
+
+Then add the package accept keywords:
+
+```
+dev-libs/libportal::projectmoon
+x11-misc/input-leap::projectmoon **
+```
+
+*The double star allows unstable git builds.*
+
+A portage env config is currently required to install this ebuild.
+Create a file `/etc/portage/env/input-leap.conf` and then add an entry
+to `/etc/portage/package.env`. The latest commits to input-leap have
+broken the git build. The last known working build of a stable release
+is v3.0.1.
+
+The `input-leap.conf` file should have the following:
+```
+MYCMAKEARGS="-DQT_DEFAULT_MAJOR_VERSION=5"
+EGIT_OVERRIDE_COMMIT_INPUT_LEAP_INPUT_LEAP="v3.0.1"
+```
+
+Then the `package.env` entry should be:
+```
+x11-misc/input-leap::projectmoon input-leap.conf
+```
+
+## USE Flags
+
+This ebuild of Input Leap supports Wayland integration via `libei`, on
+supported compositors (notably, wlroots is apparently not supported by
+upstream). To use the `libei` integration, you must have a version of
+`libportal` with Input Capture support, which at time of writing
+(libportal 0.7.1) is not yet released.
+
+This overlay contains a custom ebuild of `dev-libs/libportal` that can
+enable Input Capture. The patch is cherry-picked from the upstream
+commits.
+
+To configure Input Leap to use `libei` for Wayland support, add the
+following USE declarations:
+
+```
+dev-libs/libportal inputcapture
+x11-misc/input-leap wayland
+```
+
+Note that `inputcapture` is NOT a USE flag on the main Gentoo ebuild. So
+if you haven't unmasked this overlay's version of `libportal`, you will
+receive an error when trying to install Input Leap.
--- a/docs/Libre-Kernel.md
+++ b/docs/Libre-Kernel.md
@ -0,0 +1,143 @@
+# The Linux-libre dist-kernel
+
+This overlay provides a dist-kernel (based on
+`sys-kernel/vanilla-kernel`) using the Linux-libre kernel sources, and
+an accompanying updated version of `virtual/dist-kernel`. It is
+maintained and tested for my personal use on amd64. The Linux-libre
+kernel removes the ability for the Linux kernel to load firmware that
+is not [Free Software][free-software]. The ebuild roughly follows the
+current stable 5.15.x gentoo-kernel for amd64.
+
+The libre kernel can be installed alongside other dist-kernels, and
+works with the `dist-kernel` and `initramfs` USE flags. The ebuild
+does NOT fail if non-free firmware (i.e. `sys-kernel/linux-firmware`
+with `redistributable` USE flag set) is installed, but it will warn
+you if this is the case. It will also warn you if the `linux-firmware`
+package is not found at all, like normal dist-kernel ebuilds.
+
+The kernel installed by this ebuild has the version suffix
+`-gnu-dist`, making it easy to determine which kernel it is.
+
+## Quick Setup
+
+This is a quick guide for setting up the system to properly install the
+Linux-libre Kernel. It assumes you have set up the overlay as described
+in the README.
+
+In `/etc/portage/package.use`:
+
+```
+# Install only libre firmware
+sys-kernel/linux-firmware -redistributable -unknown-license
+
+# libre kernel with gentoo kernel patches applied
+sys-kernel/libre-kernel verify-sig
+
+# or, if you do not want gentoo patches applied
+sys-kernel/libre-kernel verify-sig -gentoo
+```
+
+In `/etc/portage/package.unmask`:
+
+```
+sys-kernel/libre-kernel::projectmoon
+virtual/dist-kernel::projectmoon
+virtual/linux-sources::projectmoon
+sec-keys/openpgp-keys-linux-libre::projectmoon
+```
+
+In `/etc/portage/package.accept_keywords`:
+
+```
+sys-kernel/librem-ec-acpi::projectmoon
+sys-kernel/libre-kernel::projectmoon ~amd64
+virtual/dist-kernel::projectmoon
+virtual/linux-sources::projectmoon
+```
+
+In `/etc/portage/package.mask`:
+
+```
+# stay on libre kernel
+sys-kernel/gentoo-kernel
+sys-kernel/gentoo-kernel-bin
+sys-kernel/vanilla-kernel
+virtual/linux-sources::gentoo
+```
+
+## Detailed Instructions
+
+The rest of this documentation covers the quick steps above in detail,
+and extra information about the Linux firmware package, the Librem EC
+ACPI module, etc.
+
+### Signature Verification
+
+It is recommended to enable GPG signature verification of
+`sys-kenrel/libre-kernel` by adding the USE flag to
+o`/etc/portage/package.use`:
+
+```
+sys-kernel/libre-kernel verify-sig
+```
+
+### Keeping the Linux-libre Kernel Installed
+
+Portage will sometimes try to install `sys-kernel/gentoo-kernel` or
+another dist-kernel if there is a newer stable version than
+`sys-kernel/libre-kernel`. This happens because of a version bump to
+`virtual/dist-kernel` before this overlay has updated its own copy of
+`virtual/dist-kernel`.
+
+To prevent portage from attempting to install another dist-kernel
+instead of the Linux-libre kernel, you should mask other dist-kernels in
+`/etc/portage/package.mask`:
+
+```
+# stay on libre kernel
+sys-kernel/gentoo-kernel
+sys-kernel/gentoo-kernel-bin
+sys-kernel/vanilla-kernel
+```
+
+### Linux Firmware
+
+*Note: If you are running the Linux-libre kernel, it is unlikely (though
+not impossible) that you need to install `sys-kernel/linux-firmware`.*
+
+To install only the Linux firmware that meets the [Free Software
+Definition][free-software], configure `/etc/portage/package.use`
+accordingly:
+
+```
+# Install only libre firmware
+sys-kernel/linux-firmware -redistributable -unknown-license
+```
+
+You can also edit `/etc/portage/profile/package.use.mask` to prevent
+the linux-firmware package from ever installing the closed-source
+firmware by adding this line:
+
+```
+# forcibly stop non-free firmware installation
+sys-kernel/linux-firmware redistributable unknown-license
+```
+
+### Using the Librem EC ACPI kernel module
+
+The Librem EC ACPI kernel module should install and be automatically
+available (via modprobe) after installation, using `emerge
+sys-kernel/librem-ec-acpi`. The module is currently installed to
+`/lib/modules/<kernel>/librem/`.
+
+This ebuild supports the `dist-kernel` USE flag, and the module will
+automatically be rebuilt when installing a new dist-kernel if that
+flag is enabled.
+
+If you are not using a dist-kernel, you will need to do `emerge
+@modules-rebuild` to install the module after you upgrade or install a
+new kernel.
+
+[free-software]: https://www.gnu.org/philosophy/free-sw.en.html#fs-definition
+[linux-libre]: https://www.fsfla.org/ikiwiki/selibre/linux-libre/
+[free-software]: https://www.gnu.org/philosophy/free-sw.en.html#fs-definition
--- a/docs/Librem.md
+++ b/docs/Librem.md
@ -0,0 +1,58 @@
+# Packages for Purism Librem Computers
+
+This overlay provides a handful of ebuilds for Purism Librem computers (particularly, the Librem 14):
+ - **sys-kernel/librem-ec-acpi**: An ebuild packaging the [Librem 14
+    EC ACPI kernel module][ec-acpi], necessary for proper functioning
+	of the laptop's battery charging and function keys.
+ * **sys-power/librem-control**: A GTK application to control
+   parameters of the Librem EC (battery charge levels, etc).
+ * **sys-apps/purism_ectool**: Tool for querying and flashing
+   Purism EC firmware images on certain Librem laptops.
+
+## Quick Setup
+
+This is a quick guide for setting up the system to properly install
+Librem-related packages. It assumes you have set up the overlay as
+described in the README.
+
+In `/etc/portage/package.unmask`:
+
+```
+sys-kernel/librem-ec-acpi::projectmoone
+sys-apps/purism_ectool::projectmoon
+sys-power/librem-control::projectmoon
+```
+
+In `/etc/portage/package.accept_keywords`:
+
+```
+sys-kernel/librem-ec-acpi::projectmoon
+sys-apps/purism_ectool::projectmoon
+sys-power/librem-control::projectmoon **
+```
+
+## The Librem EC ACPI kernel module
+
+The Librem EC ACPI kernel module should install and be automatically
+available (via modprobe) after installation, using `emerge
+sys-kernel/librem-ec-acpi`. The module is currently installed to
+`/lib/modules/<kernel>/librem/`.
+
+This ebuild supports the `dist-kernel` USE flag, and the module will
+automatically be rebuilt when installing a new dist-kernel if that
+flag is enabled.
+
+If you are not using a dist-kernel, you will need to do `emerge
+@modules-rebuild` to install the module after you upgrade or install a
+new kernel.
+
+### Librem Control and the Purism EC Tool
+
+These two appliations can be used to manipulate device-specific
+features of the Librem 14, including the flashing of firmware images.
+It is not recommended to use the EC tool from this overlay for
+flashing a firmware image. Instead, follow the official [firmware
+flashing instrutions][ec-instructions].
+
+[ec-acpi]: https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms
+[ec-instructions]: https://puri.sm/projects/librem-ec/
--- a/docs/Updating-Firefox-PWA-Connector.md
+++ b/docs/Updating-Firefox-PWA-Connector.md
@ -0,0 +1,14 @@
+How to create new version of the Firefox PWA Connector:
+
+- Check Firefox PWA repo for new version.
+- Pull latest changes of repo and check out proper tag.
+- Run `cargo vendor` in the repo, under the `native/` directory.
+- Create tarball of vendored cargo deps: `tar -czvf vendor-X.Y.Z.tar.gz vendor/`.
+- Move vendor tarball to the overlay files repo under `www-plugins/firefox-pwa-connector`.
+- Push vendored tarball for new version.
+- Copy over ebuild to new version.
+- Check the Cargo.toml of the connector for any new git deps, and add to
+  the git crates if necessary. Cargo.lock can be checked to find the
+  proper commit hashes.
+- Check repo Makefile.toml for any new installation instructions for the
+  Linux target. Replicate in `src_install` phase.
--- a/docs/Updating-Kernel-Ebuild.md
+++ b/docs/Updating-Kernel-Ebuild.md
@ -0,0 +1,26 @@
+How to update the Linux-libre Kernel ebuild for a new version
+---
+
+1. Check for new stable version of `gentoo-kernel` on packages.gentoo.org.
+2. If so, version bump `libre-kernel` ebuild to match new
+   `gentoo-kernel` version.
+3. Check the `gentoo-kernel` ebuild for changes to the Gentoo config and
+   patches versions.
+4. If the Gentoo patchset version has changed:
+   1. Make sure the patch version offset thingy matches gentoo-kernel.
+   2. Make sure config version is the same.
+   3. Make sure the config hash is the same.
+   4. Make sure ebuild applies config changes with `ebuild
+      libre-kernel-X.Y.Z.ebuild clean prepare`.
+5. Run `pkgdev manifest` to have portage download the libre kernel files
+   and update the manifest.
+5. Attempt to build the kernel using `ebuild libre-kernel-X.Y.Z.ebuild
+   clean merge`. You might need to use `sudo` or `doas` for this.
+6. Update `virtual/dist-kernel` package to new version, by copying the
+   proper dist-kernel ebuild from the gentoo repo, and adding
+   `sys-kernel/libre-kernel` to its list of possible deps.
+7. Make sure `virtual/linux-sources` is up to date. This package rarely
+   changes, but updating it follows the same procedure as
+   `virtual/dist-kernel`.
+
+If the build succeeds, the new ebuilds can be pushed to the repository.
--- a/media-fonts/fonts-meta/fonts-meta-3.ebuild
+++ b/media-fonts/fonts-meta/fonts-meta-3.ebuild
@ -0,0 +1,110 @@
+# Copyright 1999-2022 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+DESCRIPTION="Meta package for fonts to cover most needs"
+HOMEPAGE="https://wiki.gentoo.org/wiki/No_homepage"
+
+LICENSE="metapackage"
+SLOT="0"
+KEYWORDS="amd64 ~loong ~riscv x86"
+IUSE="cjk emoji +latin ms"
+
+LANGS="as bn bo brx doi dz gu hi km kn kok ks mai ml mr ne or pa ru sa sat sd si syc ta te th"
+for lang in ${LANGS}; do
+	IUSE+=" l10n_${lang}"
+done
+unset lang LANGS
+
+RDEPEND="media-fonts/cantarell
+	media-fonts/droid
+	media-fonts/noto
+	media-fonts/oldstandard
+	media-fonts/powerline-symbols
+	media-fonts/ubuntu-font-family
+	media-libs/fontconfig
+	|| (
+		media-fonts/source-code-pro
+		media-fonts/anonymous-pro
+		media-fonts/cascadia-code
+		media-fonts/fantasque-sans-mono
+		media-fonts/fira-code
+		media-fonts/fira-mono
+		media-fonts/hack
+		media-fonts/hermit
+		media-fonts/ibm-plex
+		media-fonts/inconsolata
+		media-fonts/iosevka
+		media-fonts/jetbrains-mono
+		media-fonts/montecarlo
+		media-fonts/roboto
+		media-fonts/terminus-font
+	)
+	cjk? (
+		media-fonts/noto-cjk
+	)
+	emoji? (
+		|| (
+			media-fonts/noto-emoji
+			media-fonts/joypixels
+		)
+	)
+	l10n_as? ( media-fonts/lohit-assamese )
+	l10n_bn? ( media-fonts/lohit-bengali )
+	l10n_bo? ( media-fonts/tibetan-machine-font )
+	l10n_brx? ( media-fonts/lohit-devanagari )
+	l10n_doi? ( media-fonts/lohit-devanagari )
+	l10n_dz? ( media-fonts/dzongkha-fonts )
+	l10n_gu? ( media-fonts/lohit-gujarati )
+	l10n_hi? ( media-fonts/lohit-devanagari )
+	l10n_km? ( media-fonts/khmer )
+	l10n_kn? ( media-fonts/lohit-kannada )
+	l10n_kok? ( media-fonts/lohit-devanagari )
+	l10n_ks? ( media-fonts/lohit-devanagari )
+	l10n_mai? ( media-fonts/lohit-devanagari )
+	l10n_ml? ( media-fonts/lohit-malayalam )
+	l10n_mr? (
+		media-fonts/lohit-devanagari
+		media-fonts/lohit-marathi
+	)
+	l10n_ne? (
+		media-fonts/lohit-devanagari
+		media-fonts/lohit-nepali
+	)
+	l10n_or? ( media-fonts/lohit-odia )
+	l10n_pa? ( media-fonts/lohit-gurmukhi )
+	l10n_ru? (
+		media-fonts/font-misc-cyrillic
+		media-fonts/paratype
+		media-fonts/paratype-astra
+	)
+	l10n_sa? ( media-fonts/lohit-devanagari )
+	l10n_sat? ( media-fonts/lohit-devanagari )
+	l10n_sd? ( media-fonts/lohit-devanagari )
+	l10n_si? ( media-fonts/lklug )
+	l10n_syc? ( media-fonts/font-misc-meltho )
+	l10n_ta? (
+		media-fonts/lohit-tamil
+		media-fonts/lohit-tamil-classical
+	)
+	l10n_te? ( media-fonts/lohit-telugu )
+	l10n_th? ( media-fonts/thaifonts-scalable )
+	latin? (
+		media-fonts/courier-prime
+		media-fonts/dejavu
+		media-fonts/font-cursor-misc
+		media-fonts/liberation-fonts
+		media-fonts/open-sans
+		media-fonts/quivira
+		media-fonts/signika
+		media-fonts/tex-gyre
+		media-fonts/ttf-bitstream-vera
+		media-fonts/urw-fonts
+	)
+	ms? (
+		media-fonts/corefonts
+		media-fonts/croscorefonts
+		media-fonts/crosextrafonts-caladea
+		media-fonts/crosextrafonts-carlito
+	)"
--- a/media-fonts/fonts-meta/metadata.xml
+++ b/media-fonts/fonts-meta/metadata.xml
@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+  <maintainer type="person" proxied="yes">
+    <email>alexey+gentoo@asokolov.org</email>
+    <name>Alexey Sokolov</name>
+  </maintainer>
+  <maintainer type="person" proxied="proxy">
+    <email>juippis@gentoo.org</email>
+    <name>Joonas Niilola</name>
+  </maintainer>
+  <maintainer type="project">
+    <email>fonts@gentoo.org</email>
+    <name>Fonts</name>
+  </maintainer>
+  <use>
+    <flag name="emoji">Install a font supporting emojis</flag>
+    <flag name="latin">Install additional latin fonts</flag>
+    <flag name="ms">Install (free) fonts for the "ms" preset</flag>
+  </use>
+  <stabilize-allarches/>
+</pkgmetadata>
--- a/metadata/news/2023-03-05-libre-kernel-gentoo-use-flag/2023-03-05-libre-kernel-gentoo-use-flag.en.txt
+++ b/metadata/news/2023-03-05-libre-kernel-gentoo-use-flag/2023-03-05-libre-kernel-gentoo-use-flag.en.txt
@ -0,0 +1,27 @@
+Title: Libre Kernel Gentoo USE Flag and Fixes
+Author: Yuan Liao <liaoyuan@gmail.com>
+Posted: 2023-03-01
+Revision: 1
+News-Item-Format: 2.0
+
+The latest libre-kernel ebuild (6.1.2) has been revised to support a new
+gentoo USE flag, as well as fixes to the kernel configuration version.
+The new USE flag applies a subset of the Gentoo kernel patchset (from
+the gentoo-kernel package) to the Linux-libre kernel source. Most of the
+patches apply, but the larger patchsets for the kernel do not, in many
+cases because it seems like those patches have already been applied to
+the upstream source.
+
+Applying of the Gentoo kernel patchset is controlled by the new local
+USE flag gentoo. It is enabled by default. The USE flag can be disabled
+by turning it off in /etc/portage/package.use:
+
+    sys-kernel/libre-kernel -gentoo
+
+Note: whether or not the USE flag is enabled, the patch for the default
+Gentoo kernel configuration will always be applied.
+
+Additionally, the Gentoo kernel config version has been fixed in the r1
+ebuild. The kernel configuration applied was being used from a 5.x
+build. In the future, the correct kernel config version will follow the
+gentoo-kernel package.
--- a/metadata/news/2023-03-05-libre-kernel-gentoo-use-flag/2023-03-05-libre-kernel-gentoo-use-flag.txt
+++ b/metadata/news/2023-03-05-libre-kernel-gentoo-use-flag/2023-03-05-libre-kernel-gentoo-use-flag.txt
@ -0,0 +1,27 @@
+Title: Libre Kernel Gentoo USE Flag and Fixes
+Author: projectmoon <projectmoon@agnos.is>
+Posted: 2023-03-01
+Revision: 1
+News-Item-Format: 2.0
+
+The latest libre-kernel ebuild (6.1.2) has been revised to support a new
+gentoo USE flag, as well as fixes to the kernel configuration version.
+The new USE flag applies a subset of the Gentoo kernel patchset (from
+the gentoo-kernel package) to the Linux-libre kernel source. Most of the
+patches apply, but the larger patchsets for the kernel do not, in many
+cases because it seems like those patches have already been applied to
+the upstream source.
+
+Applying of the Gentoo kernel patchset is controlled by the new local
+USE flag gentoo. It is enabled by default. The USE flag can be disabled
+by turning it off in /etc/portage/package.use:
+
+    sys-kernel/libre-kernel -gentoo
+
+Note: whether or not the USE flag is enabled, the patch for the default
+Gentoo kernel configuration will always be applied.
+
+Additionally, the Gentoo kernel config version has been fixed in the r1
+ebuild. The kernel configuration applied was being used from a 5.x
+build. In the future, the correct kernel config version will follow the
+gentoo-kernel package.
--- a/metadata/news/2023-03-29-linux-libre-fallback-urls/2023-03-29-linux-libre-fallback-urls.en.txt
+++ b/metadata/news/2023-03-29-linux-libre-fallback-urls/2023-03-29-linux-libre-fallback-urls.en.txt
@ -0,0 +1,13 @@
+Title: Libre Kernel Gentoo USE Flag and Fixes
+Author:  projectmoon <projectmoon@agnos.is>
+Posted: 2023-03-29
+Revision: 1
+News-Item-Format: 2.0
+
+The libre-kernel ebuilds now have the main Linux-libre release URLs as
+fallback SRC_URIs, in case the mirror hosting the files is down. The
+mirrors exist because sometimes the Linux-libre project removes releases
+if they discover that the release violates the Free Software
+Distribution guidelines. While good for freedom purity, this can make
+upgrades difficult. Thus, the files are mirrored on an external for the
+libre-kernel ebuilds.
--- a/metadata/news/2023-03-29-linux-libre-fallback-urls/2023-03-29-linux-libre-fallback-urls.txt
+++ b/metadata/news/2023-03-29-linux-libre-fallback-urls/2023-03-29-linux-libre-fallback-urls.txt
@ -0,0 +1,13 @@
+Title: Libre Kernel Gentoo USE Flag and Fixes
+Author:  projectmoon <projectmoon@agnos.is>
+Posted: 2023-03-29
+Revision: 1
+News-Item-Format: 2.0
+
+The libre-kernel ebuilds now have the main Linux-libre release URLs as
+fallback SRC_URIs, in case the mirror hosting the files is down. The
+mirrors exist because sometimes the Linux-libre project removes releases
+if they discover that the release violates the Free Software
+Distribution guidelines. While good for freedom purity, this can make
+upgrades difficult. Thus, the files are mirrored on an external for the
+libre-kernel ebuilds.
--- a/metadata/news/2023-04-14-linux-sources/2023-04-14-linux-sources.en.txt
+++ b/metadata/news/2023-04-14-linux-sources/2023-04-14-linux-sources.en.txt
@ -0,0 +1,15 @@
+Title: virtual/linux-sources unmask required
+Author:  projectmoon <projectmoon@agnos.is>
+Posted: 2023-04-14
+Revision: 1
+News-Item-Format: 2.0
+
+Changes to the linux-sources virtual have required that this overlay
+patches that ebuild when using the libre-kernel. If you have set up this
+overlay to only unmask specific packages, you should also add the
+linux-sources package to your package.unmask file:
+
+    virtual/linux-sources::projectmoon
+
+This will prevent portage from also installing linux sources package
+like gentoo-sources when you already have the libre-kernel installed.
--- a/metadata/news/2023-04-14-linux-sources/2023-04-14-linux-sources.txt
+++ b/metadata/news/2023-04-14-linux-sources/2023-04-14-linux-sources.txt
@ -0,0 +1,15 @@
+Title: virtual/linux-sources unmask required
+Author:  projectmoon <projectmoon@agnos.is>
+Posted: 2023-04-14
+Revision: 1
+News-Item-Format: 2.0
+
+Changes to the linux-sources virtual have required that this overlay
+patches that ebuild when using the libre-kernel. If you have set up this
+overlay to only unmask specific packages, you should also add the
+linux-sources package to your package.unmask file:
+
+    virtual/linux-sources::projectmoon
+
+This will prevent portage from also installing linux sources package
+like gentoo-sources when you already have the libre-kernel installed.
--- a/metadata/news/2024-08-22-libre-kernel-6.x/2024-08-22-libre-kernel-6.x.en.txt
+++ b/metadata/news/2024-08-22-libre-kernel-6.x/2024-08-22-libre-kernel-6.x.en.txt
@ -0,0 +1,9 @@
+Title: Libre Kernel 6.x
+Author: projectmoon <projectmoon@agnos.is>
+Posted: 2024-08-22
+Revision: 1
+News-Item-Format: 2.0
+
+From this point, I will now be following the stable 6.x releases of
+gentoo-kernel for the libre-kernel package. The last available 5.15.x
+version will remain 5.15.163, for the time being.
--- a/metadata/news/2024-08-22-libre-kernel-6.x/2024-08-22-libre-kernel-6.x.txt
+++ b/metadata/news/2024-08-22-libre-kernel-6.x/2024-08-22-libre-kernel-6.x.txt
@ -0,0 +1,9 @@
+Title: Libre Kernel 6.x
+Author: projectmoon <projectmoon@agnos.is>
+Posted: 2024-08-22
+Revision: 1
+News-Item-Format: 2.0
+
+From this point, I will now be following the stable 6.x releases of
+gentoo-kernel for the libre-kernel package. The last available 5.15.x
+version will remain 5.15.163, for the time being.
--- a/metadata/news/2024-10-04-input-leap-3/2024-10-04-input-leap-3.en.txt
+++ b/metadata/news/2024-10-04-input-leap-3/2024-10-04-input-leap-3.en.txt
@ -0,0 +1,13 @@
+Title: Input Leap 3.0.0
+Author: projectmoon <projectmoon@agnos.is>
+Posted: 2024-10-04
+Revision: 1
+News-Item-Format: 2.0
+
+Input Leap 3.0 is available. The ebuild is a 9999 version, so in order
+to install it, you will need to rebuild input leap manually, e.g. emerge
+-1 x11-misc/input-leap. The Gentoo ebuild repository still has not
+updated to libportal 0.8 at time of writing, so the custom version of
+libportal from this overlay is still required. When they do update, the
+ebuild of input-leap will be adjusted to require libportal >= 0.8, and
+properly versioned.
--- a/metadata/news/2024-10-04-input-leap-3/2024-10-04-input-leap-3.txt
+++ b/metadata/news/2024-10-04-input-leap-3/2024-10-04-input-leap-3.txt
@ -0,0 +1,13 @@
+Title: Input Leap 3.0.0
+Author: projectmoon <projectmoon@agnos.is>
+Posted: 2024-10-04
+Revision: 1
+News-Item-Format: 2.0
+
+Input Leap 3.0 is available. The ebuild is a 9999 version, so in order
+to install it, you will need to rebuild input leap manually, e.g. emerge
+-1 x11-misc/input-leap. The Gentoo ebuild repository still has not
+updated to libportal 0.8 at time of writing, so the custom version of
+libportal from this overlay is still required. When they do update, the
+ebuild of input-leap will be adjusted to require libportal >= 0.8, and
+properly versioned.
--- a/metadata/news/2024-11-07-input-leap-latest-builds-broken/2024-11-07-input-leap-latest-builds-broken.en.txt
+++ b/metadata/news/2024-11-07-input-leap-latest-builds-broken/2024-11-07-input-leap-latest-builds-broken.en.txt
@ -0,0 +1,12 @@
+Title: Input Leap Latest Builds Broken
+Author: projectmoon <projectmoon@agnos.is>
+Posted: 2024-08-22
+Revision: 1
+News-Item-Format: 2.0
+
+The latest commits to input-leap have broken the git build. The last
+known working build of a stable release is v3.0.1. To force this, create
+an env configuration for input-leap:
+
+MYCMAKEARGS="-DQT_DEFAULT_MAJOR_VERSION=5"
+EGIT_OVERRIDE_COMMIT_INPUT_LEAP_INPUT_LEAP="v3.0.1"
--- a/metadata/news/2024-11-07-input-leap-latest-builds-broken/2024-11-07-input-leap-latest-builds-broken.txt
+++ b/metadata/news/2024-11-07-input-leap-latest-builds-broken/2024-11-07-input-leap-latest-builds-broken.txt
@ -0,0 +1,12 @@
+Title: Input Leap Latest Builds Broken
+Author: projectmoon <projectmoon@agnos.is>
+Posted: 2024-08-22
+Revision: 1
+News-Item-Format: 2.0
+
+The latest commits to input-leap have broken the git build. The last
+known working build of a stable release is v3.0.1. To force this, create
+an env configuration for input-leap:
+
+MYCMAKEARGS="-DQT_DEFAULT_MAJOR_VERSION=5"
+EGIT_OVERRIDE_COMMIT_INPUT_LEAP_INPUT_LEAP="v3.0.1"
--- a/profiles/updates/Q1-2023
+++ b/profiles/updates/Q1-2023
@ -0,0 +1,3 @@
+move sys-kernel/librem-ec-acpi sys-apps/librem-ec-acpi
+move sys-firmware/purism_ectool sys-apps/purism_ectool
+move sys-apps/librem-ec-acpi sys-kernel/librem-ec-acpi
--- a/sec-keys/openpgp-keys-linux-libre/Manifest
+++ b/sec-keys/openpgp-keys-linux-libre/Manifest
@ -0,0 +1 @@
+DIST BCB7CF877E7D47A7.asc 1213 BLAKE2B 5c7cd96062200e3419915a95977e3201299b52f35886de504cc669b5b5192519805f53301f7d70c4f0ac5a261733eb169a1372c1da1a48b0cd86a42ecbfbccae SHA512 1cc1b5bc86cf5b853e1b03f8d06e2080aadefb4b6b8af55f23a7b44afb57face718227c8401162fed2cbc394cf6fddcc65d121e313905b1acd16a4cf63d21e4b
--- a/sec-keys/openpgp-keys-linux-libre/openpgp-keys-linux-libre-20221123.ebuild
+++ b/sec-keys/openpgp-keys-linux-libre/openpgp-keys-linux-libre-20221123.ebuild
@ -0,0 +1,20 @@
+# Copyright 2022 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+DESCRIPTION="OpenPGP keys used to sign Linux-libre-related packages"
+HOMEPAGE="https://www.fsfla.org/ikiwiki/selibre/linux-libre/"
+SRC_URI="https://linux-libre.fsfla.org/pub/linux-libre/SIGNING-KEY -> BCB7CF877E7D47A7.asc"
+
+LICENSE="public-domain"
+SLOT="0"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86"
+
+S="${WORKDIR}"
+
+src_install() {
+	local files=( ${A} )
+	insinto /usr/share/openpgp-keys
+	newins - linux-libre.asc < <(cat "${files[@]/#/${DISTDIR}/}" || die)
+}
--- a/sys-apps/purism_ectool/Manifest
+++ b/sys-apps/purism_ectool/Manifest
@ -0,0 +1,19 @@
+DIST ansi_term-0.11.0.crate 17087 BLAKE2B 9bd35c045a01ce4c6c4a5db1b4f15e9412bb97426eec19d4421dffbec633de8d13452c13c1dc1b30998690b78d7ed38311aca700087f13a81f66bd1d5d7300c4 SHA512 a637466a380748f939b3af090b8c0333f35581925bc03f4dda9b3f95d338836403cf5487ae3af9ff68f8245a837f8ab061aabe57a126a6a2c20f2e972c77d1fa
+DIST atty-0.2.14.crate 5470 BLAKE2B 2db856a9e898a430258f059aeaf7c844a153293e8856d90ac81f7d91a888c89198768ad5cb09303c23241fe85c560a55148fa56a303651a82b0edb895616bfab SHA512 d7b6c4b9a0f898d91ddbc41a5ee45bbf45d1d269508c8cc87ee3e3990500e41e0ec387afb1f3bc7db55bedac396dd86c6509f4bf9e5148d809c3802edcc5e1d9
+DIST bitflags-1.2.1.crate 16745 BLAKE2B 0fa6d3ce44aad7616d5cd02aad8c1d0b0fed4022650eb43067c4a72e6fc88da05442674fa51826e4858a47c9de233e1ba2229820af094197cd11bb416ceffb2b SHA512 ad89b3798845e23737a620bba581c2ff1ff3e15bac12555c765e201d2c0b90ecea0cdbc5b5b1a3fa9858c385e8e041f8226f5acfae5bbbe9925643fff2bf3f0b
+DIST cc-1.0.67.crate 53486 BLAKE2B 42fd02a5886df50857075c909819c8afcf091cee6b7bc517848786f287f4559e70a07f0a0f42a742baa2665465dfdb2139ecac7e93f1a41b16eab30556eb0259 SHA512 f1ad4abdaad2667b190d1f8df8515f603107be1f69bdbdc02b5159764a6ed18b3f672d6b06af50c7f2fd3e6e3dad5df0fcd0dda762d909ba0922c769f1efbe05
+DIST clap-2.33.3.crate 201925 BLAKE2B bec9c866481c5b3fddeb314f68af9bce38fc421e42816182de3209e8ea3447b72cf033e6251eea27fe974eff8085b7d98cdd2911b5cc0ec6b4bf4c750deb8a25 SHA512 3eb0fd648e2e3f9e5ff69a5e6cf0d867304fe18523accd036f28a86de368e4774088a6936c108ccc045092c539fe7f7494ea96420ebf6b4bec16880cea84bedf
+DIST downcast-rs-1.2.0.crate 11670 BLAKE2B 7d44d708c1ac068a02ea5d72dd3caa8a7f6d18b7ee653d520600acc9c52365824f5b8d3c68143d1d13aa438a18b16ff9975e15131cac7ec48b2d995184673d37 SHA512 b80b72f30b42c5e6b2bd33287f2dd22be5673b2fa5c1a8c75c5de224fc7eca46a55f2fce63c02d225dfbc94ac3462b4b2fec53d63331c70da6307ebcdcc6cb14
+DIST hermit-abi-0.1.18.crate 9936 BLAKE2B a5a1d1c9bdf83fdca8edc392f8fa7d9b9b248ac8d716e009300220befa5d8d80601643e768037be89bbbe6e21adbe6349c94c595cee3837c4b92b5f98ba838ad SHA512 54f060c6c1c80d41f40cec7102345147efb535aff9fa5cc0ed4ccd7f010bfdb6daaf40626fd5069af60ceb42058452803b59d4bbcfbed4c5546c79b57ae0f914
+DIST hidapi-1.2.5.crate 130695 BLAKE2B cbc920845e1ce108741925c7c8dbc15bfa864b251abd5659acdad9b7ac60a598c16a4b822bb29bfb9b0bdb2d1f68b745398c73d74155ceea03b1319a065f95b8 SHA512 38783fcba1b3d08b86ab2a2f03a8a955de82f60111f6014b1d143d09728f95d5ef825ec4b73fd04700e6170c2634e07b50310e9745ce3259019590248c2c27b0
+DIST libc-0.2.89.crate 515952 BLAKE2B f8af6016b2613ef21f83bbb47b4f2a04939ab6f2d4d525959aa90c6874348327319c7a44084f27ca52d01cca37e95e2b1c5c809e4a82fd5fcfc670d445f23ee8 SHA512 da6668611b87837532de9844bb3db18d992ebfe7e0c064646f0d24014730c9451fe74c6d9374191172c2dd091e8b9ce83a7cf56fc0644088190c8963221f5b9a
+DIST pkg-config-0.3.19.crate 15451 BLAKE2B dc23b5ef12719b4b3d2fc5c93c087399ba954a5e127be91b26619466d5d7422e71684d02905304dca65273d69b66338d94c0642e3810a14df845ef507ddc0bfb SHA512 42bc13c4e39c8f71690db527d815884acdfd2ccf5fbfea700c6ed60257e852cdcb1c443e7774409e51da53612b0ff0aa165554b99fd0cba973f94a8df52982d9
+DIST purism_ectool-9999.tar.gz 232692 BLAKE2B 8025dde406aa718336ece55430151ec30acf7b29bb9f50581abfe70d469a4780e87356bf2ea3dac601277bb117b1684876debeacff23ff3961e1cf939316a1dc SHA512 edbb688535084c8d6ebe7de9d2448248c575d7448afec6078ea90f09150079a33c96ea3b18b38b62005626db9e0c1bc201e5300954380e4dd0aa14b60ea9fd97
+DIST redox_hwio-0.1.3.crate 3264 BLAKE2B e4a1f50d8f45ce3ab7a9760f070f9882930f3b0be7754854577d483e6bbd797f1f5e5ca16dc3677351572882368597ceeaad9ff7cdcc0f91195634524245c96e SHA512 d3cc726435da87dbb10adc7ce65257e0a3e9f9668b28fd4667027c9bbcad4ec9659c3fc7c91e94aac24cd8d6439036546d13e2134eaea7209c6265b3fa67bb66
+DIST strsim-0.8.0.crate 9309 BLAKE2B 40a8be506c43ee1ffe006ddc7dee98c3d418bdd205d57b78f5d1e4c9312feb57e1eaf952e02d92d4e0932db240c6fba45beb06ea8c4fc6de1cf1faa8b6a3a939 SHA512 1d55a8d946cd55f5f37d06aea536549ded95739fa58c0f2da285a0041154c181f663682bdcac643aa198b3e762d694a04f058db985c62ebe22b5c16327ba6d34
+DIST textwrap-0.11.0.crate 17322 BLAKE2B 257428908342774593bbd3528fcdae710712ff54e8a711393a24356d8ba0e16e466a4b20c05f942c48ca76b3b5b5aaa90ec202f782cad892caa8b71ccf124da6 SHA512 f5c0fe4f28ff1a3a0931e8e235b5157a45f67967985bcc752418c5ec3481fca44a8ae4800088889b37e8cd0533f53d3c456d5ffd19b767b3f83a87b49a2e209a
+DIST unicode-width-0.1.8.crate 16732 BLAKE2B 5aa7b87eef1322e4151a3fcf981ade311b8fa030527d7561815950e58d3f15156163dfe34da6a708c37dccc3f7652bf7fc2cd899fe8bb0118b67c4113ff3a2d2 SHA512 0abba6da6981a2451e01d93bbd47652c46eb6fb07cc0214f33259fb29945bfd5ee2b302e883ddca8f68e921635f222701b7310e7da2a5e225f854980d1e474b0
+DIST vec_map-0.8.2.crate 14466 BLAKE2B 8f109fbff19604b82ea2aa61c952e2ce9b5597ccc8e1ef4e847648e2de08dece8c4debe92889edeccb8d393645fd0b62436b49d236ded7ad181c4a51239a9539 SHA512 4f1ef59bc2c437e79f1f84fe021bce5aa8ccd581f500f3d5776913d5f17d45b03ccee64f5bd03d47656318cfc9344a1f4311079d471fa409a8e4e94c143973f9
+DIST winapi-0.3.9.crate 1200382 BLAKE2B cb5799749ccd935ea2d7068d953cecf19f543d9db7dc16ad4584bb7005373ada34937a3ced7225544d8bc765da599911c7a3190efefb3a25b7c1bb7123b4f673 SHA512 ff8b7b78065f3d8999ec03c725a0460ebc059771bf071c7a3df3f0ecd733edf3b0a2450024d4e24e1aedddaecd9038ce1376c0d8bbf45132068cf45cf4a53a97
+DIST winapi-i686-pc-windows-gnu-0.4.0.crate 2918815 BLAKE2B 4d357e4d30f9552972170d65b9a5358b69c46a3e772fe05efc22f3d4ffc1caeeaad7aacdc7abd503a7ad0545f8bd7d22bf351dcb6df76f812fa4d45c34d65df0 SHA512 a672ccefd0730a8166fef1d4e39f9034d9ae426a3f5e28d1f4169fa5c5790767693f281d890e7804773b34acdb0ae1febac33cde8c50c0044a5a6152c7209ec2
+DIST winapi-x86_64-pc-windows-gnu-0.4.0.crate 2947998 BLAKE2B 2ad1ea8b5fa07d544e910ccba043ae925269b76b26c9da356305b34b86741dd8b9aff0b9ffe3d562db4fcd7d7c46a11ce9e3168b782b1d89ae6881742b7ede82 SHA512 4a654af6a5d649dc87e00497245096b35a2894ae66f155cb62389902c3b93ddcc5cf7d0d8b9dd97b291d2d80bc686af2298e80abef6ac69883f4a54e79712513
--- a/sys-apps/purism_ectool/purism_ectool-9999.ebuild
+++ b/sys-apps/purism_ectool/purism_ectool-9999.ebuild
@ -0,0 +1,44 @@
+# Copyright 2017-2024 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+# Auto-Generated by cargo-ebuild 0.5.4-r1
+
+EAPI=8
+
+CRATES="
+	ansi_term@0.11.0
+	atty@0.2.14
+	bitflags@1.2.1
+	cc@1.0.67
+	clap@2.33.3
+	downcast-rs@1.2.0
+	hermit-abi@0.1.18
+	hidapi@1.2.5
+	libc@0.2.89
+	pkg-config@0.3.19
+	redox_hwio@0.1.3
+	strsim@0.8.0
+	textwrap@0.11.0
+	unicode-width@0.1.8
+	vec_map@0.8.2
+	winapi@0.3.9
+	winapi-i686-pc-windows-gnu@0.4.0
+	winapi-x86_64-pc-windows-gnu@0.4.0
+"
+
+inherit cargo
+
+EC_VERSION="l14-freeze-202404-test-20240425"
+
+DESCRIPTION="Purism Librem EC tool"
+HOMEPAGE="https://source.puri.sm/firmware/librem-ec//-/tree//tool"
+SRC_URI="
+$(cargo_crate_uris ${CRATES})
+https://source.puri.sm/firmware/librem-ec/-/archive/${EC_VERSION}/librem-ec-${EC_VERSION}.tar.gz -> ${P}.tar.gz
+"
+
+LICENSE="MIT"
+SLOT="0"
+KEYWORDS="~amd64"
+S="${WORKDIR}/librem-ec-${EC_VERSION}/tool"
+RESTRICT="mirror"
--- a/sys-apps/purism_ectool/purism_ectool.tera
+++ b/sys-apps/purism_ectool/purism_ectool.tera
@ -0,0 +1,36 @@
+{%- block header -%}
+# Copyright 2017-{{ this_year }} Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+# Auto-Generated by cargo-ebuild {{ cargo_ebuild_ver }}
+{% endblock %}
+EAPI={%- block eapi -%}7{%- endblock %}
+
+{% block crates -%}
+CRATES="
+{% for crate in crates -%}
+{{ crate }}
+{%- endfor -%}"
+{%- endblock %}
+
+inherit {% block inherit -%}cargo{%- endblock %}
+
+EC_VERSION="l14-shutoff-202403"
+
+DESCRIPTION={%- block description -%}"{{ description | trim }}"{%- endblock %}
+HOMEPAGE="https://source.puri.sm/firmware/librem-ec//-/tree//tool"
+SRC_URI={%- block src_uri -%}{% raw -%}"
+$(cargo_crate_uris ${CRATES})
+https://source.puri.sm/firmware/librem-ec/-/archive/${EC_VERSION}/librem-ec-${EC_VERSION}.tar.gz -> ${P}.tar.gz
+"{%- endraw %}{%- endblock %}
+
+LICENSE="MIT"
+SLOT={%- block slot -%}"0"{%- endblock %}
+KEYWORDS={%- block keyword -%}"~amd64"{%- endblock %}
+{% block variables -%}
+S="${WORKDIR}/librem-ec-${EC_VERSION}/tool"
+RESTRICT="mirror"
+{%- endblock %}
+
+{%- block phases -%}
+{%- endblock -%}
--- a/sys-kernel/libre-kernel/Manifest
+++ b/sys-kernel/libre-kernel/Manifest
@ -0,0 +1,20 @@
+DIST genpatches-5.15-175.base.tar.xz 7264676 BLAKE2B 6911fc0fcef31daa55ddeb93e121acf4a95d130866f37ac0113a8697df1996c13bbf65e14f4a5703f7bb3f4dd3ebfb29e258ca358d191c0580a7f8e61fbf7c0c SHA512 3fc49566b23ef50590a3b9f90eb99558c9e37847259e0defdfb0ca036c37b7f45c4989d58787b8488c67ea031114173319346c1c17799680ebfdc581ae7e4588
+DIST genpatches-5.15-175.extras.tar.xz 4060 BLAKE2B 1ff5b5e69f9cb0e243d03d761c430bcb04ef698199c6a68e15c9535cf58b8fc0b12703fced2fd1e884c7c7d7b948b778f633d2a5de619de9a0acee60ef7c20a7 SHA512 8925f59f2d30f07838ca111c45496d7fa0229362065fbe6643dcf6dd0998ee747a8d8ed217a63b6e77b28d8b0775872408fdf8260e6c737db3a4aade0f299041
+DIST genpatches-6.6-54.base.tar.xz 2922380 BLAKE2B f65404127bb6547208aeddac1996a4a2659bd99ff7429bcaff28247a867c000e962457725eab80db2c76297f1e5c27806dc6fb23e31d5694b6df783e65995227 SHA512 102f721f87478ad18599bb5ff65cd236180dd3d9d058786a5306cb36be3f30a2d2ef684e83b6f458d4de78a196323e87d346eba704bfbce733010aed6ac3d7f9
+DIST genpatches-6.6-54.extras.tar.xz 4060 BLAKE2B 22ea7d143bfe168bc5d9d30832423bcd33b49c1b3b5ddf031000d7d9fce96f6fa0fb1d06fd33b27a5de9c9f3833a139557f0ed7408ef12b23568784ff38ca7a9 SHA512 1b1a229b5923e7f3426139b17608b5feae6061313f7aea66de23f09a54696def39bf4b384c4e884a3e5c758c08e04dcfe1ab7f2aa331db74b59f5e511c6f2c5b
+DIST genpatches-6.6-58.base.tar.xz 3154204 BLAKE2B 5b9456e93cb0984599e065fab0d05e40b7efbc8079763ede75ed7a6e7f0e241de96f0c6438cde52f64a5074f5bfcc5d55b5d3c21a9e9528138ea5c36e164ea58 SHA512 e775ac64564c201c3e1293d34a70f347a5afd5691a006d958f69959d2eea0af690cf66f7bdd450034ef9eb43daeccbedd58819dc688cd3e7e9933da9312cbf75
+DIST genpatches-6.6-58.extras.tar.xz 4060 BLAKE2B 7e16c5d713aaf221335b81f3a301e9bb1e7f243d9bc6739c3dd07bb3cfedbe6bd5a763ce418172c838fbd3de82909cabff7c2e5c4b4f1b675098b709ddc5203e SHA512 315bfdf633398b3b1a9650dae88fdd0c1442336cabe45a3f2722e968f510da13050657e8d35acf8a313981bd9403f5056abea182a0115a79952a2740ceb4ff88
+DIST genpatches-6.6-65.base.tar.xz 3582916 BLAKE2B 3d750c677e61c122144de989a55db6f04a2a545981858b71c602c156f802478ad19f4d87629760be724a9b522b377479df9f0c5f9a859235c5fc438df95c2aae SHA512 1ac5e7fb36e50227a6bdf035562f11401ef6a19c1a7af2d001d224b8710e3aa10434d828a3a0213a1f5cce101992bb803199e5d4e76474b657dc5c4d6328c385
+DIST genpatches-6.6-65.extras.tar.xz 4060 BLAKE2B 53cdbf5d680c9943d189e7606caa10c18bd3317789ffc1f120bf535255d80bfb5e3969fe952eb0da3c1001ee41e93755616332363465d4714a67a90140c43bfb SHA512 b5b3c817426be391a72633740beb4ba7b4e2546ee441081906d77ba31636321501af414140d487d284de325f80d004aefb241f3e349ef3ccd62d2c6fc4d7cf7e
+DIST gentoo-kernel-config-g13.tar.gz 5759 BLAKE2B 831f89078e539c8b4ce244528dfd847c12a45b52d540eb10d85ec0d9deb1c14288d8de12456865c92d16e3523ec3595676787a8f3b79545d76870b0fb68deb5d SHA512 2a7230cce57a67e3333f9a88a311afe4a928e27ce76036747451cb77d3186569ad11d7a5b827748ad53290a17ad63637a8362ca896516f85ff0944a8d68265a6
+DIST gentoo-kernel-config-g14.tar.gz 5686 BLAKE2B e5147ff4ffab92428b3e7f1b0897b997f8a298805f4f43b0a4d3047607bbb1a5ebfc268e0bb9688372a5eda561df9f256c78e00cdd7e3caf7868724214722f56 SHA512 f79638f9ff9dd0154512baf0234024216b6708d35a3c03a580ca5913286ad1ea13bdde5ea9b4722c6a7cd8d591c11ec52c1e225111a260343cd56aa1f1a88502
+DIST kernel-x86_64-fedora.config.6.1.102-gentoo 228685 BLAKE2B e68236ccc1d51b2aff850eda9f3197b7ea95b8a88716bc7b07dad30348a86fdbb99a948060300dddae73ca82267d851d357f1c9547a9dcefae1364deebdbd124 SHA512 42bec2ddb9cf7eb6e84bbdeb23eb98dc11c9cea41f6134b776010c6b36833b520a290f0ef0145379de15c7f7834398fa5e3aaabd7258d7d4e89567faa09eeb4c
+DIST kernel-x86_64-fedora.config.6.6.12-gentoo 243607 BLAKE2B 7e670d37c6471e50aa0ba395570cd0173af0210afe63faa48d7a147327110652e3aab5c339cf10ed22a6a20e81e505aee84311beb21fda3eb577e06ea55ecac8 SHA512 c484403a60670dd006ecbe65240cb00d97e8b3fe22d1169c5b6ccb92bcdbddb3ecd474d2b57880b30baf6a38bcef11fc8d56b8b0b02fcddd859833c3640cdc9c
+DIST linux-libre-5.15.165-gnu.tar.xz 119931308 BLAKE2B 312d6a2091f48fe013d9207c749ff6fd850565e1a77b8bd437167fe8b7863f2b4c39b4ee43bd00614c3b8229a6de2ae671863e1a258e8248d8dc19e5333e309d SHA512 475063e224e3fc3c9bcc64b79dc5d3e41159bbf144c7cd1dd7b024c90996d788718b1ebceb19412b357cb6b8976f7135ad202a2b36197dbb7a311c4b1be9997b
+DIST linux-libre-5.15.165-gnu.tar.xz.sign 195 BLAKE2B 69c860aeb656c3207d31209ff71c8d75aab95842611500aec2c59ab222ff7e2c27535cbe952da02edfa425afb6c18cd4a29668e0a46a40ee295bfad856e26287 SHA512 7418b5312cf8a2c5f0ab00f1a3906858256a1d172adfc493d95f7e1f06ece7efa00c9bc71b9cccf447bbb6b76c42ee8201044d46fa028b49be47edcc05983c77
+DIST linux-libre-6.6.47-gnu.tar.xz 131910236 BLAKE2B 34c90f7f96a00b05f6de5bab316a538f091afbc34c5d5abe5febb930077e81426bafa0f1997b25b1acb67242691e2b782a18f878f271b172cf37757862df9cc0 SHA512 305a92fcbe22efc33c1098156195c281fc9235a39151a59f32ff1de515409732f5793eacccec83c089925f5cc206baf28b16002e1010c95db5af56ed041869cc
+DIST linux-libre-6.6.47-gnu.tar.xz.sign 195 BLAKE2B ebc1564bc0b0de60050af17f78af8b6ba38aa59bba52c4b9c1a2f32e941fe6214ed42b5e4e986700a3e5871b4298bfac06790cb7b903830b34639eb2a8d6a44d SHA512 8a88e80b8702d1d68ad012dd72ccc32e512fdf994761850f187a19e90cd1534588150fdd2dfb942a152b1c56cd3f5ac5fba0586cb784a3d7af13c9ca517f6199
+DIST linux-libre-6.6.51-gnu.tar.xz 131971516 BLAKE2B f39f9c6b61eb2c1a479082f7f8054973fc532a363ce79251fc0cddf3651302835959e3177fb1b1cd87ad4246fba04bf99d0ddb362064ad4d67a3104def5988f5 SHA512 aa00b79c71d7d496546a85e31e0d53b706e03c7f6aa067ca1a09fc841ed062efb6a194f25ec0cf7ad27f239d90524b88f6e90d76e6d88f0d4fa0cc65bdf2a342
+DIST linux-libre-6.6.51-gnu.tar.xz.sign 195 BLAKE2B 53b3cc4f8a7ebeb10e43bed19cfd1b009b925c77116846169084491c44c27b18edb4f6cc60283bfee16f45dd4cf9b94b992067bcd6871848c2a02f176468507a SHA512 b0ba576d98b682a4ab19936228540b551cd2dbb0157046d17f964974862b8189c0b40877fe848e96e396b8bf9d970120562afdf9dbefdd98bfd5acdfb526abb3
+DIST linux-libre-6.6.58-gnu.tar.xz 131974404 BLAKE2B 36b2c780289aa047ef935ab033f593a11326c827a3ee3b94ad93904d639d94d36cad8ae48eb47371b68418fdfd615033922800686be9675ca0c6eca43aa2b0f0 SHA512 551d27412b42877de5a38e20dbcd2f6bda041e1f64a91da805725253956206adf8d19b5a56af5b15693e8dd486f73451615d96002c532f994ff4961801fef1c9
+DIST linux-libre-6.6.58-gnu.tar.xz.sign 195 BLAKE2B 6012a731e63d326d59ae3bfc9532ecb80ca63a9936c4d2524acd0773d67d7faa7862ea6a59ee85862c347868e3c5ed872d38f76c893de5626f0eea4432ac98f0 SHA512 76e0ecd9d63fc66a4bbf7d02e4de4d5e30541ef6ca4b0dfb467ef42669f8ce00ec4e461714f4ab036e04b0b35c9809adf83870ff3559a5a24e42cc86fcea6c83
--- a/sys-kernel/libre-kernel/libre-kernel-5.15.165.ebuild
+++ b/sys-kernel/libre-kernel/libre-kernel-5.15.165.ebuild
@ -0,0 +1,148 @@
+# Copyright 2020-2024 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit kernel-build verify-sig
+
+BASE_VER="$(ver_cut 1).$(ver_cut 2).$(ver_cut 3)"
+RESTRICT="mirror"
+
+GENPATCHES_P=genpatches-${PV%.*}-$(( ${PV##*.} + 10 ))
+CONFIG_VER=6.1.102-gentoo
+#CONFIG_HASH=ec69da7a42b5b7c3da91572ef22097b069ddbd01
+GENTOO_CONFIG_VER=g13
+
+DESCRIPTION="GNU Linux-libre kernel built from upstream sources"
+HOMEPAGE="https://www.fsfla.org/ikiwiki/selibre/linux-libre/"
+SRC_URI+="
+	https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.base.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.extras.tar.xz
+	https://github.com/projg2/gentoo-kernel-config/archive/${GENTOO_CONFIG_VER}.tar.gz
+		-> gentoo-kernel-config-${GENTOO_CONFIG_VER}.tar.gz
+	verify-sig? (
+		https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+		https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+	)
+	amd64? (
+		https://raw.githubusercontent.com/projg2/fedora-kernel-config-for-gentoo/${CONFIG_VER}/kernel-x86_64-fedora.config
+			-> kernel-x86_64-fedora.config.${CONFIG_VER}
+	)
+"
+
+# Workdir is named linux-PV.
+MY_P=linux-${PV}
+S=${WORKDIR}/${MY_P}
+
+LICENSE="GPL-2"
+KEYWORDS="amd64"
+IUSE="debug +gentoo"
+
+BDEPEND="
+	debug? ( dev-util/pahole )
+	verify-sig? ( sec-keys/openpgp-keys-linux-libre )
+"
+PDEPEND="
+	>=virtual/dist-kernel-${PV}
+"
+
+VERIFY_SIG_OPENPGP_KEY_PATH=${BROOT}/usr/share/openpgp-keys/linux-libre.asc
+
+pkg_pretend() {
+	if has_version -d sys-kernel/linux-firmware[redistributable]; then
+		ewarn "sys-kernel/linux-firmware was found installed on your system,"
+		ewarn "but it is configured to install non-Free firmware files."
+		ewarn "The non-Free firmware files may be required for some hardware"
+		ewarn "work. The Linux-libre kernel cannot load non-Free firmware."
+		ewarn "To install only the Free firmware, set the -redistributable"
+		ewarn "USE flag on sys-kernel/linux-firmware."
+
+		if use initramfs; then
+			elog
+			elog "If you decide to change or remove linux-firmware later, you"
+			elog "can rebuild the initramfs via issuing a command equivalent to:"
+			elog
+			elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+		fi
+	else
+		if ! has_version -d sys-kernel/linux-firmware; then
+			ewarn "sys-kernel/linux-firmware[-redistributable] not found installed"
+			ewarn "on your system. This package provides various firmware files that"
+			ewarn "may be needed for your hardware to work.  If in doubt, it is recommended"
+			ewarn "to pause or abort the build process and install it before"
+			ewarn "resuming."
+
+			if use initramfs; then
+				elog
+				elog "If you decide to install linux-firmware later, you can rebuild"
+				elog "the initramfs via issuing a command equivalent to:"
+				elog
+				elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+			fi
+		fi
+	fi
+}
+
+src_unpack() {
+	if use verify-sig; then
+		FILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz
+		SIGFILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz.sign
+		verify-sig_verify_detached $FILE $SIGFILE
+	fi
+
+	default
+}
+
+src_prepare() {
+	local PATCHES
+	if use gentoo; then
+		# Fiters out the kernel incremental version upgrade patches,
+		# leaving only the Gentoo bug fix/functionality changes. The
+		# regex removes any patches starting with 10XX to 14XX.
+		MY_PATCHES=$(find "${WORKDIR}"/*.patch -printf "%f\n" | grep -v -E -e '^1[01234][[:digit:]][[:digit:]]_.+.patch')
+		PATCHES=$(echo "$MY_PATCHES" | sed 's|^|'"${WORKDIR}/"'|g')
+	else
+		# If no patches are to be applied, apply only the config changes
+		# for a Gentoo installation, as this does not change any actual
+		# Kernel functionality.
+		PATCHES="${WORKDIR}/4567_distro-Gentoo-Kconfig.patch"
+	fi
+
+	default
+
+	local biendian=false
+
+	# prepare the default config
+	case ${ARCH} in
+		amd64)
+			cp "${DISTDIR}/kernel-x86_64-fedora.config.${CONFIG_VER}" .config || die
+			;;
+		*)
+			die "Unsupported arch ${ARCH}"
+			;;
+	esac
+
+	sed -i 's/EXTRAVERSION = -gnu/EXTRAVERSION = /' "${S}"/Makefile || \
+		die 'could not remove EXTRAVERSION'
+
+	local myversion="-gnu-dist"
+	echo "CONFIG_LOCALVERSION=\"${myversion}\"" > "${T}"/version.config || die
+	local dist_conf_path="${WORKDIR}/gentoo-kernel-config-${GENTOO_CONFIG_VER}"
+
+	local merge_configs=(
+		"${T}"/version.config
+		"${dist_conf_path}"/base.config
+	)
+	use debug || merge_configs+=(
+		"${dist_conf_path}"/no-debug.config
+	)
+
+	# this covers ppc64 and aarch64_be only for now
+	if [[ ${biendian} == true && $(tc-endian) == big ]]; then
+		merge_configs+=( "${dist_conf_path}/big-endian.config" )
+	fi
+
+	kernel-build_merge_configs "${merge_configs[@]}"
+}
--- a/sys-kernel/libre-kernel/libre-kernel-6.6.47.ebuild
+++ b/sys-kernel/libre-kernel/libre-kernel-6.6.47.ebuild
@ -0,0 +1,148 @@
+# Copyright 2020-2024 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit kernel-build verify-sig
+
+BASE_VER="$(ver_cut 1).$(ver_cut 2).$(ver_cut 3)"
+RESTRICT="mirror"
+
+GENPATCHES_P=genpatches-${PV%.*}-$(( ${PV##*.} + 7 ))
+CONFIG_VER=6.6.12-gentoo
+#CONFIG_HASH=ec69da7a42b5b7c3da91572ef22097b069ddbd01
+GENTOO_CONFIG_VER=g13
+
+DESCRIPTION="GNU Linux-libre kernel built from upstream sources"
+HOMEPAGE="https://www.fsfla.org/ikiwiki/selibre/linux-libre/"
+SRC_URI+="
+	https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.base.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.extras.tar.xz
+	https://github.com/projg2/gentoo-kernel-config/archive/${GENTOO_CONFIG_VER}.tar.gz
+		-> gentoo-kernel-config-${GENTOO_CONFIG_VER}.tar.gz
+	verify-sig? (
+		https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+		https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+	)
+	amd64? (
+		https://raw.githubusercontent.com/projg2/fedora-kernel-config-for-gentoo/${CONFIG_VER}/kernel-x86_64-fedora.config
+			-> kernel-x86_64-fedora.config.${CONFIG_VER}
+	)
+"
+
+# Workdir is named linux-PV.
+MY_P=linux-${PV}
+S=${WORKDIR}/${MY_P}
+
+LICENSE="GPL-2"
+KEYWORDS="amd64"
+IUSE="debug +gentoo"
+
+BDEPEND="
+	debug? ( dev-util/pahole )
+	verify-sig? ( sec-keys/openpgp-keys-linux-libre )
+"
+PDEPEND="
+	>=virtual/dist-kernel-${PV}
+"
+
+VERIFY_SIG_OPENPGP_KEY_PATH=${BROOT}/usr/share/openpgp-keys/linux-libre.asc
+
+pkg_pretend() {
+	if has_version -d sys-kernel/linux-firmware[redistributable]; then
+		ewarn "sys-kernel/linux-firmware was found installed on your system,"
+		ewarn "but it is configured to install non-Free firmware files."
+		ewarn "The non-Free firmware files may be required for some hardware"
+		ewarn "work. The Linux-libre kernel cannot load non-Free firmware."
+		ewarn "To install only the Free firmware, set the -redistributable"
+		ewarn "USE flag on sys-kernel/linux-firmware."
+
+		if use initramfs; then
+			elog
+			elog "If you decide to change or remove linux-firmware later, you"
+			elog "can rebuild the initramfs via issuing a command equivalent to:"
+			elog
+			elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+		fi
+	else
+		if ! has_version -d sys-kernel/linux-firmware; then
+			ewarn "sys-kernel/linux-firmware[-redistributable] not found installed"
+			ewarn "on your system. This package provides various firmware files that"
+			ewarn "may be needed for your hardware to work.  If in doubt, it is recommended"
+			ewarn "to pause or abort the build process and install it before"
+			ewarn "resuming."
+
+			if use initramfs; then
+				elog
+				elog "If you decide to install linux-firmware later, you can rebuild"
+				elog "the initramfs via issuing a command equivalent to:"
+				elog
+				elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+			fi
+		fi
+	fi
+}
+
+src_unpack() {
+	if use verify-sig; then
+		FILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz
+		SIGFILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz.sign
+		verify-sig_verify_detached $FILE $SIGFILE
+	fi
+
+	default
+}
+
+src_prepare() {
+	local PATCHES
+	if use gentoo; then
+		# Fiters out the kernel incremental version upgrade patches,
+		# leaving only the Gentoo bug fix/functionality changes. The
+		# regex removes any patches starting with 10XX to 14XX.
+		MY_PATCHES=$(find "${WORKDIR}"/*.patch -printf "%f\n" | grep -v -E -e '^1[01234][[:digit:]][[:digit:]]_.+.patch')
+		PATCHES=$(echo "$MY_PATCHES" | sed 's|^|'"${WORKDIR}/"'|g')
+	else
+		# If no patches are to be applied, apply only the config changes
+		# for a Gentoo installation, as this does not change any actual
+		# Kernel functionality.
+		PATCHES="${WORKDIR}/4567_distro-Gentoo-Kconfig.patch"
+	fi
+
+	default
+
+	local biendian=false
+
+	# prepare the default config
+	case ${ARCH} in
+		amd64)
+			cp "${DISTDIR}/kernel-x86_64-fedora.config.${CONFIG_VER}" .config || die
+			;;
+		*)
+			die "Unsupported arch ${ARCH}"
+			;;
+	esac
+
+	sed -i 's/EXTRAVERSION = -gnu/EXTRAVERSION = /' "${S}"/Makefile || \
+		die 'could not remove EXTRAVERSION'
+
+	local myversion="-gnu-dist"
+	echo "CONFIG_LOCALVERSION=\"${myversion}\"" > "${T}"/version.config || die
+	local dist_conf_path="${WORKDIR}/gentoo-kernel-config-${GENTOO_CONFIG_VER}"
+
+	local merge_configs=(
+		"${T}"/version.config
+		"${dist_conf_path}"/base.config
+	)
+	use debug || merge_configs+=(
+		"${dist_conf_path}"/no-debug.config
+	)
+
+	# this covers ppc64 and aarch64_be only for now
+	if [[ ${biendian} == true && $(tc-endian) == big ]]; then
+		merge_configs+=( "${dist_conf_path}/big-endian.config" )
+	fi
+
+	kernel-build_merge_configs "${merge_configs[@]}"
+}
--- a/sys-kernel/libre-kernel/libre-kernel-6.6.51.ebuild
+++ b/sys-kernel/libre-kernel/libre-kernel-6.6.51.ebuild
@ -0,0 +1,148 @@
+# Copyright 2020-2024 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit kernel-build verify-sig
+
+BASE_VER="$(ver_cut 1).$(ver_cut 2).$(ver_cut 3)"
+RESTRICT="mirror"
+
+GENPATCHES_P=genpatches-${PV%.*}-$(( ${PV##*.} + 7 ))
+CONFIG_VER=6.6.12-gentoo
+#CONFIG_HASH=ec69da7a42b5b7c3da91572ef22097b069ddbd01
+GENTOO_CONFIG_VER=g13
+
+DESCRIPTION="GNU Linux-libre kernel built from upstream sources"
+HOMEPAGE="https://www.fsfla.org/ikiwiki/selibre/linux-libre/"
+SRC_URI+="
+	https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.base.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.extras.tar.xz
+	https://github.com/projg2/gentoo-kernel-config/archive/${GENTOO_CONFIG_VER}.tar.gz
+		-> gentoo-kernel-config-${GENTOO_CONFIG_VER}.tar.gz
+	verify-sig? (
+		https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+		https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+	)
+	amd64? (
+		https://raw.githubusercontent.com/projg2/fedora-kernel-config-for-gentoo/${CONFIG_VER}/kernel-x86_64-fedora.config
+			-> kernel-x86_64-fedora.config.${CONFIG_VER}
+	)
+"
+
+# Workdir is named linux-PV.
+MY_P=linux-${PV}
+S=${WORKDIR}/${MY_P}
+
+LICENSE="GPL-2"
+KEYWORDS="amd64"
+IUSE="debug +gentoo"
+
+BDEPEND="
+	debug? ( dev-util/pahole )
+	verify-sig? ( sec-keys/openpgp-keys-linux-libre )
+"
+PDEPEND="
+	>=virtual/dist-kernel-${PV}
+"
+
+VERIFY_SIG_OPENPGP_KEY_PATH=${BROOT}/usr/share/openpgp-keys/linux-libre.asc
+
+pkg_pretend() {
+	if has_version -d sys-kernel/linux-firmware[redistributable]; then
+		ewarn "sys-kernel/linux-firmware was found installed on your system,"
+		ewarn "but it is configured to install non-Free firmware files."
+		ewarn "The non-Free firmware files may be required for some hardware"
+		ewarn "work. The Linux-libre kernel cannot load non-Free firmware."
+		ewarn "To install only the Free firmware, set the -redistributable"
+		ewarn "USE flag on sys-kernel/linux-firmware."
+
+		if use initramfs; then
+			elog
+			elog "If you decide to change or remove linux-firmware later, you"
+			elog "can rebuild the initramfs via issuing a command equivalent to:"
+			elog
+			elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+		fi
+	else
+		if ! has_version -d sys-kernel/linux-firmware; then
+			ewarn "sys-kernel/linux-firmware[-redistributable] not found installed"
+			ewarn "on your system. This package provides various firmware files that"
+			ewarn "may be needed for your hardware to work.  If in doubt, it is recommended"
+			ewarn "to pause or abort the build process and install it before"
+			ewarn "resuming."
+
+			if use initramfs; then
+				elog
+				elog "If you decide to install linux-firmware later, you can rebuild"
+				elog "the initramfs via issuing a command equivalent to:"
+				elog
+				elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+			fi
+		fi
+	fi
+}
+
+src_unpack() {
+	if use verify-sig; then
+		FILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz
+		SIGFILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz.sign
+		verify-sig_verify_detached $FILE $SIGFILE
+	fi
+
+	default
+}
+
+src_prepare() {
+	local PATCHES
+	if use gentoo; then
+		# Fiters out the kernel incremental version upgrade patches,
+		# leaving only the Gentoo bug fix/functionality changes. The
+		# regex removes any patches starting with 10XX to 14XX.
+		MY_PATCHES=$(find "${WORKDIR}"/*.patch -printf "%f\n" | grep -v -E -e '^1[01234][[:digit:]][[:digit:]]_.+.patch')
+		PATCHES=$(echo "$MY_PATCHES" | sed 's|^|'"${WORKDIR}/"'|g')
+	else
+		# If no patches are to be applied, apply only the config changes
+		# for a Gentoo installation, as this does not change any actual
+		# Kernel functionality.
+		PATCHES="${WORKDIR}/4567_distro-Gentoo-Kconfig.patch"
+	fi
+
+	default
+
+	local biendian=false
+
+	# prepare the default config
+	case ${ARCH} in
+		amd64)
+			cp "${DISTDIR}/kernel-x86_64-fedora.config.${CONFIG_VER}" .config || die
+			;;
+		*)
+			die "Unsupported arch ${ARCH}"
+			;;
+	esac
+
+	sed -i 's/EXTRAVERSION = -gnu/EXTRAVERSION = /' "${S}"/Makefile || \
+		die 'could not remove EXTRAVERSION'
+
+	local myversion="-gnu-dist"
+	echo "CONFIG_LOCALVERSION=\"${myversion}\"" > "${T}"/version.config || die
+	local dist_conf_path="${WORKDIR}/gentoo-kernel-config-${GENTOO_CONFIG_VER}"
+
+	local merge_configs=(
+		"${T}"/version.config
+		"${dist_conf_path}"/base.config
+	)
+	use debug || merge_configs+=(
+		"${dist_conf_path}"/no-debug.config
+	)
+
+	# this covers ppc64 and aarch64_be only for now
+	if [[ ${biendian} == true && $(tc-endian) == big ]]; then
+		merge_configs+=( "${dist_conf_path}/big-endian.config" )
+	fi
+
+	kernel-build_merge_configs "${merge_configs[@]}"
+}
--- a/sys-kernel/libre-kernel/libre-kernel-6.6.58-r1.ebuild
+++ b/sys-kernel/libre-kernel/libre-kernel-6.6.58-r1.ebuild
@ -0,0 +1,148 @@
+# Copyright 2020-2024 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit kernel-build verify-sig
+
+BASE_VER="$(ver_cut 1).$(ver_cut 2).$(ver_cut 3)"
+RESTRICT="mirror"
+
+GENPATCHES_P=genpatches-${PV%.*}-$(( ${PV##*.} + 7 ))
+CONFIG_VER=6.6.12-gentoo
+#CONFIG_HASH=ec69da7a42b5b7c3da91572ef22097b069ddbd01
+GENTOO_CONFIG_VER=g14
+
+DESCRIPTION="GNU Linux-libre kernel built from upstream sources"
+HOMEPAGE="https://www.fsfla.org/ikiwiki/selibre/linux-libre/"
+SRC_URI+="
+	https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.base.tar.xz
+	https://dev.gentoo.org/~mpagano/dist/genpatches/${GENPATCHES_P}.extras.tar.xz
+	https://github.com/projg2/gentoo-kernel-config/archive/${GENTOO_CONFIG_VER}.tar.gz
+		-> gentoo-kernel-config-${GENTOO_CONFIG_VER}.tar.gz
+	verify-sig? (
+		https://git.agnos.is/projectmoon/projectmoon-overlay-files/media/branch/main/sys-kernel/libre-kernel/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+		https://linux-libre.fsfla.org/pub/linux-libre/releases/${BASE_VER}-gnu/linux-libre-${BASE_VER}-gnu.tar.xz.sign
+	)
+	amd64? (
+		https://raw.githubusercontent.com/projg2/fedora-kernel-config-for-gentoo/${CONFIG_VER}/kernel-x86_64-fedora.config
+			-> kernel-x86_64-fedora.config.${CONFIG_VER}
+	)
+"
+
+# Workdir is named linux-PV.
+MY_P=linux-${PV}
+S=${WORKDIR}/${MY_P}
+
+LICENSE="GPL-2"
+KEYWORDS="amd64"
+IUSE="debug +gentoo"
+
+BDEPEND="
+	debug? ( dev-util/pahole )
+	verify-sig? ( sec-keys/openpgp-keys-linux-libre )
+"
+PDEPEND="
+	>=virtual/dist-kernel-${PV}
+"
+
+VERIFY_SIG_OPENPGP_KEY_PATH=${BROOT}/usr/share/openpgp-keys/linux-libre.asc
+
+pkg_pretend() {
+	if has_version -d sys-kernel/linux-firmware[redistributable]; then
+		ewarn "sys-kernel/linux-firmware was found installed on your system,"
+		ewarn "but it is configured to install non-Free firmware files."
+		ewarn "The non-Free firmware files may be required for some hardware"
+		ewarn "work. The Linux-libre kernel cannot load non-Free firmware."
+		ewarn "To install only the Free firmware, set the -redistributable"
+		ewarn "USE flag on sys-kernel/linux-firmware."
+
+		if use initramfs; then
+			elog
+			elog "If you decide to change or remove linux-firmware later, you"
+			elog "can rebuild the initramfs via issuing a command equivalent to:"
+			elog
+			elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+		fi
+	else
+		if ! has_version -d sys-kernel/linux-firmware; then
+			ewarn "sys-kernel/linux-firmware[-redistributable] not found installed"
+			ewarn "on your system. This package provides various firmware files that"
+			ewarn "may be needed for your hardware to work.  If in doubt, it is recommended"
+			ewarn "to pause or abort the build process and install it before"
+			ewarn "resuming."
+
+			if use initramfs; then
+				elog
+				elog "If you decide to install linux-firmware later, you can rebuild"
+				elog "the initramfs via issuing a command equivalent to:"
+				elog
+				elog "    emerge --config ${CATEGORY}/${PN}:${SLOT}"
+			fi
+		fi
+	fi
+}
+
+src_unpack() {
+	if use verify-sig; then
+		FILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz
+		SIGFILE="${DISTDIR}"/linux-libre-${PV}-gnu.tar.xz.sign
+		verify-sig_verify_detached $FILE $SIGFILE
+	fi
+
+	default
+}
+
+src_prepare() {
+	local PATCHES
+	if use gentoo; then
+		# Fiters out the kernel incremental version upgrade patches,
+		# leaving only the Gentoo bug fix/functionality changes. The
+		# regex removes any patches starting with 10XX to 14XX.
+		MY_PATCHES=$(find "${WORKDIR}"/*.patch -printf "%f\n" | grep -v -E -e '^1[01234][[:digit:]][[:digit:]]_.+.patch')
+		PATCHES=$(echo "$MY_PATCHES" | sed 's|^|'"${WORKDIR}/"'|g')
+	else
+		# If no patches are to be applied, apply only the config changes
+		# for a Gentoo installation, as this does not change any actual
+		# Kernel functionality.
+		PATCHES="${WORKDIR}/4567_distro-Gentoo-Kconfig.patch"
+	fi
+
+	default
+
+	local biendian=false
+
+	# prepare the default config
+	case ${ARCH} in
+		amd64)
+			cp "${DISTDIR}/kernel-x86_64-fedora.config.${CONFIG_VER}" .config || die
+			;;
+		*)
+			die "Unsupported arch ${ARCH}"
+			;;
+	esac
+
+	sed -i 's/EXTRAVERSION = -gnu/EXTRAVERSION = /' "${S}"/Makefile || \
+		die 'could not remove EXTRAVERSION'
+
+	local myversion="-gnu-dist"
+	echo "CONFIG_LOCALVERSION=\"${myversion}\"" > "${T}"/version.config || die
+	local dist_conf_path="${WORKDIR}/gentoo-kernel-config-${GENTOO_CONFIG_VER}"
+
+	local merge_configs=(
+		"${T}"/version.config
+		"${dist_conf_path}"/base.config
+	)
+	use debug || merge_configs+=(
+		"${dist_conf_path}"/no-debug.config
+	)
+
+	# this covers ppc64 and aarch64_be only for now
+	if [[ ${biendian} == true && $(tc-endian) == big ]]; then
+		merge_configs+=( "${dist_conf_path}/big-endian.config" )
+	fi
+
+	kernel-build_merge_configs "${merge_configs[@]}"
+}
--- a/sys-kernel/libre-kernel/metadata.xml
+++ b/sys-kernel/libre-kernel/metadata.xml
@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+	<maintainer type="project">
+		<email>projectmoon@agnos.is</email>
+		<name>projectmoon</name>
+	</maintainer>
+	<use>
+	  <flag name="initramfs">Build initramfs along with the kernel.</flag>
+      <flag name="gentoo">Apply selected patches from the Gentoo kernel patchset.</flag>
+	</use>
+</pkgmetadata>
--- a/sys-kernel/libre-sources/Manifest
+++ b/sys-kernel/libre-sources/Manifest
@ -1,3 +0,0 @@
-DIST linux-5.10.tar.xz 114230900 BLAKE2B 86103699a6bc906e85429430df098b0ddb7cfc8c887f98b37f994498388d634554e119eadb1b15f591bdf4f463e7efb7420e3e370af0029b7ed9e988a5f26b01 SHA512 ccc52db049a66ff146d9fc84fb00e783f2d04211156233a382f87589fec7631b8fbb3e76bfd94279607b883d25f9745e6c7d2bd62b13311dc6b425002bd42ec0
-DIST patch-5.10-gnu-5.10.47-gnu.xz 1542276 BLAKE2B 88c69d768103da84571bc3ec3a819dd41cd543411a191f25a8f8e8f3c5472c9f78a364845203b090e911e8dcc13d20cfddbfc533adef052652d95d97c6c7bf61 SHA512 deb1ea9b54af09c3ea48ee066a8a315da0d82459c3e46cbcff71d69de5a6549ebe75fb9ce94da89164338dc2680f312f8ff8ef7ac35d40ce404b1bbb679661cf
-DIST patch-5.10-gnu-5.10.48-gnu.xz 1542880 BLAKE2B 26dd0d4b9a60c315aa9ebf376ab29c6a93d75a7be554af75df4e0d6a81252ae8d72b5d26daab9ac6e0010cb024f36b681da6610fae91d1423abee5a76eecc54a SHA512 60751c93cb5f8fbe65ea8709f5dd35783840c2e912010ac87101882035540cc7983a6d92720647cbaa2f054492a3ad1f0e6118354e632c5e9abbaa4151278649
--- a/sys-kernel/libre-sources/libre-sources-5.10.47.ebuild
+++ b/sys-kernel/libre-sources/libre-sources-5.10.47.ebuild
@ -1,26 +0,0 @@
-EAPI="6"
-K_SECURITY_UNSUPPORTED="1"
-K_PREDEBLOBBED="1"
-ETYPE="sources"
-inherit kernel-2
-detect_version
-
-DESCRIPTION="Full sources for the Linux Libre kernel"
-HOMEPAGE="https://www.fsfla.org/ikiwiki/selibre/linux-libre/"
-BASE_URI="http://linux-libre.fsfla.org/pub/linux-libre/releases/${KV_MAJOR}.${KV_MINOR}-gnu/linux-libre-${KV_MAJOR}.${KV_MINOR}-gnu.tar.xz -> linux-${KV_MAJOR}.${KV_MINOR}.tar.xz"
-PATCH_URI="http://linux-libre.fsfla.org/pub/linux-libre/releases/${PV}-gnu/patch-${KV_MAJOR}.${KV_MINOR}-gnu-${PV}-gnu.xz"
-SRC_URI="${BASE_URI} ${PATCH_URI}"
-RESTRICT="mirror"
-KEYWORDS="~amd64"
-UNIPATCH_LIST_DEFAULT=""
-UNIPATCH_LIST="${DISTDIR}/patch-5.10-gnu-5.10.47-gnu.xz"
-
-pkg_postinst() {
-	kernel-2_pkg_postinst
-	einfo "For more info on this patchset, and how to report problems, see:"
-	einfo "${HOMEPAGE}"
-}
-
-pkg_postrm() {
-	kernel-2_pkg_postrm
-}
--- a/sys-kernel/libre-sources/libre-sources-5.10.48.ebuild
+++ b/sys-kernel/libre-sources/libre-sources-5.10.48.ebuild
@ -1,26 +0,0 @@
-EAPI="6"
-K_SECURITY_UNSUPPORTED="1"
-K_PREDEBLOBBED="1"
-ETYPE="sources"
-inherit kernel-2
-detect_version
-
-DESCRIPTION="Full sources for the Linux Libre kernel"
-HOMEPAGE="https://www.fsfla.org/ikiwiki/selibre/linux-libre/"
-BASE_URI="http://linux-libre.fsfla.org/pub/linux-libre/releases/${KV_MAJOR}.${KV_MINOR}-gnu/linux-libre-${KV_MAJOR}.${KV_MINOR}-gnu.tar.xz -> linux-${KV_MAJOR}.${KV_MINOR}.tar.xz"
-PATCH_URI="http://linux-libre.fsfla.org/pub/linux-libre/releases/${PV}-gnu/patch-${KV_MAJOR}.${KV_MINOR}-gnu-${PV}-gnu.xz"
-SRC_URI="${BASE_URI} ${PATCH_URI}"
-RESTRICT="mirror"
-KEYWORDS="~amd64"
-UNIPATCH_LIST_DEFAULT=""
-UNIPATCH_LIST="${DISTDIR}/patch-5.10-gnu-${KV_MAJOR}.${KV_MINOR}.${KV_PATCH}-gnu.xz"
-
-pkg_postinst() {
-	kernel-2_pkg_postinst
-	einfo "For more info on this patchset, and how to report problems, see:"
-	einfo "${HOMEPAGE}"
-}
-
-pkg_postrm() {
-	kernel-2_pkg_postrm
-}
--- a/sys-kernel/librem-ec-acpi/Manifest
+++ b/sys-kernel/librem-ec-acpi/Manifest
@ -0,0 +1,2 @@
+DIST librem-ec-acpi-dkms-v0.9.1.tar.gz 13003 BLAKE2B 87d7988be2de75d491eaaa49918db354d426deefd57b4afa72b1447e5993d9b5b06b6964092c050ef039d7d9faa33e55137c1879a1b959e6f4f3ce877137e6db SHA512 93ee26917eddbef9aa9c0eb83007452ebf57c279f41c3061ee52756bb1f748c72935067b19c3417ed7b8a9795990b0f060241c0b7f2348d7f8ec01e9f88dcd3c
+DIST librem-ec-acpi-dkms-v0.9.2.tar.gz 13093 BLAKE2B 0c29aeec2f4804be98f628b16c2219acf805d3659d8dd4797db2cdcc94316bfb5ab5c396d2b3584de12b573907e671b0422e89c0a774516e4b1e573032fd5843 SHA512 b5d10fcf34a8b424138f9db1b06e916d809462ea55c7ca2565f13154da4fa49736ac95fb1b131c27ee49aa5f170f3e8a1a9c9a61c69e0364bcee37669759e8f6
--- a/sys-kernel/librem-ec-acpi/librem-ec-acpi-0.9.1-r1.ebuild
+++ b/sys-kernel/librem-ec-acpi/librem-ec-acpi-0.9.1-r1.ebuild
@ -0,0 +1,46 @@
+# Copyright 2021 projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit linux-info linux-mod
+
+DESCRIPTION="Librem EC ACPI Driver"
+HOMEPAGE="https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms"
+SRC_URI="https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms/-/archive/v${PV}/librem-ec-acpi-dkms-v${PV}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64"
+
+IUSE="dist-kernel"
+RDEPEND="dist-kernel? ( virtual/dist-kernel:= )"
+DEPEND="${RDEPEND}"
+
+S="${WORKDIR}/librem-ec-acpi-dkms-v${PV}/"
+MODULE_NAMES="librem_ec_acpi(librem:${S}:${S})"
+BUILD_TARGETS="clean all"
+
+src_prepare() {
+	default
+
+	# Makefile hardcoded to point at running kernel
+	# but we want the user-chosen kernel.
+	linux-info_get_any_version
+	sed -i "s/\$(shell uname -r)/${KV_FULL}/" Makefile \
+		|| die "could not set kernel version in makefile"
+}
+
+pkg_setup() {
+	if ! use kernel_linux ; then
+		die "Unable to install"
+	fi
+
+	BUILD_PARAMS="KV=${KV_FULL} KSRC=${KERNEL_DIR} KERNELDIR=${KV_DIR}"
+	linux-mod_pkg_setup
+}
+
+src_install() {
+	linux-mod_src_install
+	einstalldocs
+}
--- a/sys-kernel/librem-ec-acpi/librem-ec-acpi-0.9.1.ebuild
+++ b/sys-kernel/librem-ec-acpi/librem-ec-acpi-0.9.1.ebuild
@ -0,0 +1,38 @@
+# Copyright 2021 projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit linux-info linux-mod
+
+DESCRIPTION="Librem EC ACPI Driver"
+HOMEPAGE="https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms"
+SRC_URI="https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms/-/archive/v${PV}/librem-ec-acpi-dkms-v${PV}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64"
+
+S="${WORKDIR}/librem-ec-acpi-dkms-v${PV}/"
+MODULE_NAMES="librem_ec_acpi(librem:${S}:${S})"
+BUILD_TARGETS="clean all"
+
+src_prepare() {
+	default
+
+	# Makefile hardcoded to point at running kernel
+	# but we want the user-chosen kernel.
+	linux-info_get_any_version
+	sed -i "s/\$(shell uname -r)/${KV_FULL}/" Makefile \
+		|| die "could not set kernel version in makefile"
+}
+
+pkg_setup() {
+	linux-mod_pkg_setup
+	BUILD_PARAMS="KERNELDIR=${KV_DIR}"
+}
+
+src_install() {
+	linux-mod_src_install
+	einstalldocs
+}
--- a/sys-kernel/librem-ec-acpi/librem-ec-acpi-0.9.2.ebuild
+++ b/sys-kernel/librem-ec-acpi/librem-ec-acpi-0.9.2.ebuild
@ -0,0 +1,46 @@
+# Copyright 2021-2023 projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit linux-info linux-mod
+
+DESCRIPTION="Librem EC ACPI Driver"
+HOMEPAGE="https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms"
+SRC_URI="https://source.puri.sm/nicole.faerber/librem-ec-acpi-dkms/-/archive/v${PV}/librem-ec-acpi-dkms-v${PV}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64"
+
+IUSE="dist-kernel"
+RDEPEND="dist-kernel? ( virtual/dist-kernel:= )"
+DEPEND="${RDEPEND}"
+
+S="${WORKDIR}/librem-ec-acpi-dkms-v${PV}/"
+MODULE_NAMES="librem_ec_acpi(librem:${S}:${S})"
+BUILD_TARGETS="clean all"
+
+src_prepare() {
+	default
+
+	# Makefile hardcoded to point at running kernel
+	# but we want the user-chosen kernel.
+	linux-info_get_any_version
+	sed -i "s/\$(shell uname -r)/${KV_FULL}/" Makefile \
+		|| die "could not set kernel version in makefile"
+}
+
+pkg_setup() {
+	if ! use kernel_linux ; then
+		die "Unable to install"
+	fi
+
+	BUILD_PARAMS="KV=${KV_FULL} KSRC=${KERNEL_DIR} KERNELDIR=${KV_DIR}"
+	linux-mod_pkg_setup
+}
+
+src_install() {
+	linux-mod_src_install
+	einstalldocs
+}
--- a/sys-power/librem-control/Manifest
+++ b/sys-power/librem-control/Manifest
@ -0,0 +1 @@
+DIST librem-control-9999.tar.gz 19126 BLAKE2B e5721e04c8a7996e35aa51f40e4d56acb9f59880a8266b0d6e5c515b2a6367d628973113c9776ef7d79070d7dfeda09704686340843c835e685a93922756f841 SHA512 0d3bd3d38bc0c3f476d96214e68883a2f6ad270842b4b4922ea0f4706aaf14f188ebf08f0a23fd5524c9f8e3360aa70288b0c730d56df69b0c0f137d2694e8e7
--- a/sys-power/librem-control/librem-control-9999.ebuild
+++ b/sys-power/librem-control/librem-control-9999.ebuild
@ -0,0 +1,24 @@
+# Copyright 1999-2022 Gentoo Authors, projectmoon
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit gnome.org xdg
+
+MY_COMMIT="a19bfbf4f6bd1d2b0d2d6abf02252e1e0cbc2d61"
+RESTRICT="mirror"
+
+DESCRIPTION="App to control some system settings of Librem devices."
+HOMEPAGE="https://source.puri.sm/nicole.faerber/librem-control"
+SRC_URI="https://source.puri.sm/nicole.faerber/librem-control/-/archive/${MY_COMMIT}/${PN}-${MY_COMMIT}.tar.gz -> ${P}.tar.gz"
+S="${WORKDIR}/${PN}-${MY_COMMIT}"
+
+LICENSE="GPL-2"
+SLOT="0"
+
+DEPEND="
+	>=sys-kernel/librem-ec-acpi-0.9.1-r1
+	>=gui-libs/gtk-4.6:4
+	>=sys-auth/polkit-121
+"
+RDEPEND="${DEPEND}"
--- a/virtual/dist-kernel/dist-kernel-5.15.165.ebuild
+++ b/virtual/dist-kernel/dist-kernel-5.15.165.ebuild
@ -0,0 +1,17 @@
+# Copyright 2021-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+DESCRIPTION="Virtual to depend on any Distribution Kernel"
+SLOT="0/${PVR}"
+KEYWORDS="amd64 ~arm arm64 ~hppa ~ppc ppc64 ~sparc x86"
+
+RDEPEND="
+	|| (
+		~sys-kernel/gentoo-kernel-${PV}
+		~sys-kernel/gentoo-kernel-bin-${PV}
+		~sys-kernel/vanilla-kernel-${PV}
+		~sys-kernel/libre-kernel-${PV}
+	)
+"
--- a/virtual/dist-kernel/dist-kernel-6.6.47.ebuild
+++ b/virtual/dist-kernel/dist-kernel-6.6.47.ebuild
@ -0,0 +1,17 @@
+# Copyright 2021-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+DESCRIPTION="Virtual to depend on any Distribution Kernel"
+SLOT="0/${PVR}"
+KEYWORDS="amd64 ~arm arm64 ~hppa ~ppc ppc64 ~sparc x86"
+
+RDEPEND="
+	|| (
+		~sys-kernel/gentoo-kernel-${PV}
+		~sys-kernel/gentoo-kernel-bin-${PV}
+		~sys-kernel/vanilla-kernel-${PV}
+		~sys-kernel/libre-kernel-${PV}
+	)
+"
--- a/virtual/dist-kernel/dist-kernel-6.6.51.ebuild
+++ b/virtual/dist-kernel/dist-kernel-6.6.51.ebuild
@ -0,0 +1,17 @@
+# Copyright 2021-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+DESCRIPTION="Virtual to depend on any Distribution Kernel"
+SLOT="0/${PVR}"
+KEYWORDS="amd64 ~arm arm64 ~hppa ~ppc ppc64 ~sparc x86"
+
+RDEPEND="
+	|| (
+		~sys-kernel/gentoo-kernel-${PV}
+		~sys-kernel/gentoo-kernel-bin-${PV}
+		~sys-kernel/vanilla-kernel-${PV}
+		~sys-kernel/libre-kernel-${PV}
+	)
+"
--- a/virtual/dist-kernel/dist-kernel-6.6.58-r1.ebuild
+++ b/virtual/dist-kernel/dist-kernel-6.6.58-r1.ebuild
@ -0,0 +1,17 @@
+# Copyright 2021-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+DESCRIPTION="Virtual to depend on any Distribution Kernel"
+SLOT="0/${PVR}"
+KEYWORDS="amd64 ~arm arm64 ~hppa ~ppc ppc64 ~sparc x86"
+
+RDEPEND="
+	|| (
+		~sys-kernel/gentoo-kernel-${PV}
+		~sys-kernel/gentoo-kernel-bin-${PV}
+		~sys-kernel/vanilla-kernel-${PV}
+		~sys-kernel/libre-kernel-${PV}
+	)
+"
--- a/virtual/linux-sources/linux-sources-3-r8.ebuild
+++ b/virtual/linux-sources/linux-sources-3-r8.ebuild
@ -0,0 +1,28 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+DESCRIPTION="Virtual for Linux kernel sources"
+SLOT="0"
+KEYWORDS="~alpha amd64 arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86"
+IUSE="firmware"
+
+RDEPEND="
+	firmware? ( sys-kernel/linux-firmware )
+	|| (
+		sys-kernel/gentoo-sources
+		sys-kernel/vanilla-sources
+		sys-kernel/git-sources
+		sys-kernel/mips-sources
+		sys-kernel/pf-sources
+		sys-kernel/rt-sources
+		sys-kernel/zen-sources
+		sys-kernel/raspberrypi-sources
+		sys-kernel/gentoo-kernel
+		sys-kernel/gentoo-kernel-bin
+		sys-kernel/vanilla-kernel
+		sys-kernel/linux-next
+		sys-kernel/asahi-sources
+		sys-kernel/libre-kernel
+	)"
--- a/x11-misc/input-leap/files/0001-remove-files.patch
+++ b/x11-misc/input-leap/files/0001-remove-files.patch
@ -0,0 +1,289 @@
+From 2ca65310de96d2493f5cfc8937239a00056d3f2b Mon Sep 17 00:00:00 2001
+From: projectmoon <projectmoon@agnos.is>
+Date: Fri, 4 Oct 2024 12:46:52 +0200
+Subject: [PATCH] remove files not needed for gentoo
+
+---
+ CMakeLists.txt                             |   2 -
+ res/io.github.input_leap.InputLeap.desktop |   9 -
+ res/io.github.input_leap.InputLeap.svg     | 239 ---------------------
+ 3 files changed, 250 deletions(-)
+ delete mode 100644 res/io.github.input_leap.InputLeap.desktop
+ delete mode 100644 res/io.github.input_leap.InputLeap.svg
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index d1d1d212..417d1845 100644
+--- a/CMakeLists.txt
+++ b/CMakeLists.txt
+@@ -303,8 +303,6 @@ elseif (UNIX AND NOT APPLE)
+     install(FILES res/io.github.input_leap.InputLeap.appdata.xml DESTINATION share/metainfo)
+ 
+     configure_files (${CMAKE_CURRENT_SOURCE_DIR}/dist/rpm ${CMAKE_BINARY_DIR}/rpm)
+-    install(FILES res/io.github.input_leap.InputLeap.svg DESTINATION share/icons/hicolor/scalable/apps)
+-    install(FILES res/io.github.input_leap.InputLeap.desktop DESTINATION share/applications)
+ endif()
+ 
+ #
+diff --git a/res/io.github.input_leap.InputLeap.desktop b/res/io.github.input_leap.InputLeap.desktop
+deleted file mode 100644
+index 13d9d73f..00000000
+--- a/res/io.github.input_leap.InputLeap.desktop
+++ /dev/null
+@@ -1,9 +0,0 @@
+-[Desktop Entry]
+-Type=Application
+-Name=Input Leap
+-Comment=Keyboard and mouse sharing solution
+-Exec=input-leap
+-Icon=io.github.input_leap.InputLeap
+-Terminal=false
+-Categories=Network
+-Keywords=keyboard;mouse;sharing;network;share;
+diff --git a/res/io.github.input_leap.InputLeap.svg b/res/io.github.input_leap.InputLeap.svg
+deleted file mode 100644
+index 6b81c466..00000000
+--- a/res/io.github.input_leap.InputLeap.svg
+++ /dev/null
+@@ -1,239 +0,0 @@
+-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+-<!-- Created with Inkscape (http://www.inkscape.org/) -->
+-
+-<svg
+-   width="100"
+-   height="100"
+-   viewBox="0 0 26.458333 26.458333"
+-   version="1.1"
+-   id="svg699"
+-   inkscape:version="1.3.2 (091e20ef0f, 2023-11-25, custom)"
+-   sodipodi:docname="io.github.input_leap.InputLeap.svg"
+-   xml:space="preserve"
+-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+-   xmlns="http://www.w3.org/2000/svg"
+-   xmlns:svg="http://www.w3.org/2000/svg"><sodipodi:namedview
+-     id="namedview701"
+-     pagecolor="#ffffff"
+-     bordercolor="#000000"
+-     borderopacity="0.25"
+-     inkscape:showpageshadow="2"
+-     inkscape:pageopacity="0.0"
+-     inkscape:pagecheckerboard="0"
+-     inkscape:deskcolor="#d1d1d1"
+-     inkscape:document-units="mm"
+-     showgrid="false"
+-     showguides="false"
+-     inkscape:zoom="4.0000001"
+-     inkscape:cx="32.749999"
+-     inkscape:cy="46.999999"
+-     inkscape:window-width="2560"
+-     inkscape:window-height="1412"
+-     inkscape:window-x="0"
+-     inkscape:window-y="0"
+-     inkscape:window-maximized="1"
+-     inkscape:current-layer="layer1"
+-     inkscape:lockguides="false"><sodipodi:guide
+-       position="13.229166,23.8125"
+-       orientation="0,1"
+-       id="guide10631"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="23.8125,13.229166"
+-       orientation="-1,0"
+-       id="guide10641"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="13.229166,2.6458333"
+-       orientation="0,1"
+-       id="guide10643"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="2.6458333,13.229166"
+-       orientation="-1,0"
+-       id="guide10645"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="13.229166,13.229166"
+-       orientation="0,1"
+-       id="guide10705"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(78,154,6)" /><sodipodi:guide
+-       position="13.229167,6.0978193"
+-       orientation="-1,0"
+-       id="guide10707"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(78,154,6)" /><sodipodi:guide
+-       position="17.271309,10.628642"
+-       orientation="0.70710678,-0.70710678"
+-       id="guide10709"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="13.229166,13.229166"
+-       orientation="-0.70710678,-0.70710678"
+-       id="guide10711"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="13.229166,22.489583"
+-       orientation="0,1"
+-       id="guide11277"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="3.96875,13.229166"
+-       orientation="-1,0"
+-       id="guide12005"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="13.229167,3.9687503"
+-       orientation="0,1"
+-       id="guide14185"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="22.400418,14.522835"
+-       orientation="-1,0"
+-       id="guide14187"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="39.495086,5.0181873"
+-       orientation="0,1"
+-       id="guide21375"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="17.784392,8.67394"
+-       orientation="0,1"
+-       id="guide22047"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="13.229166,21.166666"
+-       orientation="0,1"
+-       id="guide22049"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="5.2916666,13.229166"
+-       orientation="-1,0"
+-       id="guide22051"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="21.166666,13.229166"
+-       orientation="-1,0"
+-       id="guide22053"
+-       inkscape:locked="false"
+-       inkscape:label=""
+-       inkscape:color="rgb(0,134,229)" /><sodipodi:guide
+-       position="25.878604,5.0181873"
+-       orientation="-0.70710678,-0.70710678"
+-       id="guide7550"
+-       inkscape:locked="false" /><sodipodi:guide
+-       position="13.229167,2.0009114"
+-       orientation="0,-1"
+-       id="guide12036"
+-       inkscape:locked="false" /><sodipodi:guide
+-       position="0.046772166,30.808144"
+-       orientation="0,-1"
+-       id="guide454"
+-       inkscape:locked="false" /></sodipodi:namedview><defs
+-     id="defs696"><inkscape:path-effect
+-       effect="spiro"
+-       id="path-effect8894"
+-       is_visible="true"
+-       lpeversion="1" /><inkscape:path-effect
+-       effect="spiro"
+-       id="path-effect22164"
+-       is_visible="true"
+-       lpeversion="1" /><inkscape:path-effect
+-       effect="bspline"
+-       id="path-effect22045"
+-       is_visible="true"
+-       lpeversion="1"
+-       weight="33.333333"
+-       steps="2"
+-       helper_size="0"
+-       apply_no_weight="true"
+-       apply_with_weight="true"
+-       only_selected="false" /><inkscape:path-effect
+-       effect="bspline"
+-       id="path-effect22041"
+-       is_visible="true"
+-       lpeversion="1"
+-       weight="33.333333"
+-       steps="2"
+-       helper_size="0"
+-       apply_no_weight="true"
+-       apply_with_weight="true"
+-       only_selected="false" /><inkscape:path-effect
+-       effect="spiro"
+-       id="path-effect22017"
+-       is_visible="true"
+-       lpeversion="1" /><inkscape:path-effect
+-       effect="spiro"
+-       id="path-effect22013"
+-       is_visible="true"
+-       lpeversion="1" /><inkscape:path-effect
+-       effect="spiro"
+-       id="path-effect22005"
+-       is_visible="true"
+-       lpeversion="1" /><linearGradient
+-       id="linearGradient11273"
+-       inkscape:swatch="solid"><stop
+-         style="stop-color:#ff00cf;stop-opacity:0.61176473;"
+-         offset="0"
+-         id="stop11271" /></linearGradient><linearGradient
+-       id="linearGradient1606"
+-       inkscape:swatch="solid"><stop
+-         style="stop-color:#000000;stop-opacity:1;"
+-         offset="0"
+-         id="stop1604" /></linearGradient></defs><g
+-     inkscape:label="Layer 1"
+-     inkscape:groupmode="layer"
+-     id="layer1"><rect
+-       style="fill:#4096b9;fill-opacity:1;stroke:#233f92;stroke-width:0.265;stroke-dasharray:none;stroke-opacity:1"
+-       id="rect925"
+-       width="9.9269505"
+-       height="7.4202018"
+-       x="2.1983447"
+-       y="4.1871085" /><path
+-       style="fill:none;fill-opacity:1;stroke:#233f92;stroke-width:0.79375;stroke-dasharray:none;stroke-opacity:1"
+-       d="M 8.3496831,12.332784 6.0193016,12.332106"
+-       id="path37578"
+-       sodipodi:nodetypes="cc" /><path
+-       style="fill:none;fill-opacity:1;stroke:#233f92;stroke-width:0.264999;stroke-dasharray:none;stroke-opacity:1"
+-       d="m 4.4758708,13.05758 5.4172431,3.4e-5"
+-       id="path37578-9-5-3"
+-       sodipodi:nodetypes="cc" /><path
+-       id="path6593-5"
+-       style="fill:#98c43d;fill-opacity:1;stroke:#040501;stroke-width:0.132;stroke-opacity:1;stroke-dasharray:none"
+-       d="m 21.035357,13.274256 2.183939,-1.23e-4 c 2.97e-4,-0.01343 8.16e-4,-0.02646 0.0011,-0.0399 -0.0147,-5.0986268 -2.812533,-9.2048343 -6.314919,-9.2136068 l 0.437346,-1.968175 -3.978052,2.9383218 3.978051,3.0959351 -0.569186,-2.1248427 c 2.823247,0.1552185 4.250535,3.3859171 4.261687,7.3123976 z m -4.075233,-9.3292648 -3.3e-5,6.3e-6"
+-       sodipodi:nodetypes="ccccccccccc" /><path
+-       id="path6593-5-2"
+-       style="fill:#98c43d;fill-opacity:1;stroke:#040501;stroke-width:0.132;stroke-opacity:1;stroke-dasharray:none"
+-       d="m 7.3457166,14.047745 -2.183939,1.23e-4 c -2.97e-4,0.01343 -8.16e-4,0.02646 -0.0011,0.0399 0.0147,5.098626 2.8125329,9.204834 6.3149194,9.213606 l -0.437346,1.968175 3.978051,-2.938321 -3.97805,-3.095936 0.569185,2.124843 C 8.7841906,21.204917 7.3569025,17.974218 7.3457506,14.047738 Z m 4.0752334,9.329264 3.3e-5,-6e-6"
+-       sodipodi:nodetypes="ccccccccccc" /><path
+-       style="fill:#51d1cb;fill-opacity:1;stroke:#000000;stroke-width:0.132;stroke-dasharray:none;stroke-opacity:1"
+-       d="m 19.376425,22.452116 1.631929,-0.859453 -2.918061,-2.013736 -2.918061,-2.013736 0.940335,6.605828 1.631929,-0.859451 0.761321,2.096398 2.485174,-1.308811 z"
+-       id="path5593-5"
+-       sodipodi:nodetypes="ccccccccc" /><path
+-       style="fill:#279a95;fill-opacity:1;stroke:#00100f;stroke-width:0.132;stroke-dasharray:none;stroke-opacity:1"
+-       d="m 21.185865,20.352059 1.631929,-0.859453 -2.918061,-2.013736 -2.918061,-2.013736 0.940335,6.605828 1.631929,-0.859451 0.761321,2.096398 2.485174,-1.308811 z"
+-       id="path5593-5-6"
+-       sodipodi:nodetypes="ccccccccc" /><path
+-       style="fill:#1a625f;fill-opacity:1;stroke:#000000;stroke-width:0.132;stroke-dasharray:none;stroke-opacity:1"
+-       d="m 23.030806,18.194971 1.631929,-0.859453 -2.918061,-2.013736 -2.918061,-2.013736 0.940335,6.605828 1.631929,-0.859451 0.761321,2.096398 2.485174,-1.308811 z"
+-       id="path5593-5-2"
+-       sodipodi:nodetypes="ccccccccc" /></g></svg>
+-- 
+2.46.2
+
--- a/x11-misc/input-leap/input-leap-9999.ebuild
+++ b/x11-misc/input-leap/input-leap-9999.ebuild
@ -0,0 +1,90 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit desktop virtualx xdg cmake git-r3
+
+DESCRIPTION="Share a mouse and keyboard between computers (fork of Barrier)"
+HOMEPAGE="https://github.com/input-leap/input-leap"
+EGIT_REPO_URI="https://github.com/input-leap/input-leap.git"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="wayland gui test"
+RESTRICT="!test? ( test )"
+
+RDEPEND="
+	net-misc/curl
+	x11-libs/libICE
+	x11-libs/libSM
+	x11-libs/libX11
+	x11-libs/libXext
+	x11-libs/libXi
+	x11-libs/libXinerama
+	x11-libs/libXrandr
+	x11-libs/libXtst
+	wayland? (
+		dev-libs/libei
+		dev-libs/libportal[inputcapture]
+	)
+	gui? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtnetwork:5
+		dev-qt/qtwidgets:5
+		net-dns/avahi[mdnsresponder-compat]
+	)
+	dev-libs/openssl:0=
+"
+DEPEND="
+	${RDEPEND}
+	dev-cpp/gtest
+	dev-cpp/gulrak-filesystem
+	x11-base/xorg-proto
+"
+
+DOCS=(
+	ChangeLog
+	README.md
+	doc/${PN}.conf.example{,-advanced,-basic}
+)
+
+MYWORK="${WORKDIR}/input-leap-9999/"
+
+src_prepare() {
+	eapply "${FILESDIR}"/0001-remove-files.patch
+	cmake_src_prepare
+}
+
+src_configure() {
+	# gentoo is on qt5; but upstream defaults to 6.
+	local mycmakeargs=(
+		-DQT_DEFAULT_MAJOR_VERSION=5
+		-DBARRIER_BUILD_GUI=$(usex gui)
+		-DBARRIER_BUILD_INSTALLER=OFF
+		-DBARRIER_BUILD_TESTS=$(usex test)
+		-DINPUTLEAP_BUILD_LIBEI=$(usex wayland)
+		-DBARRIER_REVISION=00000000
+		-DBARRIER_USE_EXTERNAL_GTEST=ON
+		-DBARRIER_VERSION_STAGE=gentoo
+	)
+
+	cmake_src_configure
+}
+
+src_test() {
+	"${BUILD_DIR}"/bin/unittests || die
+	virtx "${BUILD_DIR}"/bin/integtests || die
+}
+
+src_install() {
+	cmake_src_install
+	einstalldocs
+	doman doc/${PN}{c,s}.1
+
+	if use gui; then
+		doicon -s 256 res/${PN}.png
+		make_desktop_entry ${PN} "Input Leap" ${PN} Utility
+	fi
+}
--- a/x11-misc/input-leap/metadata.xml
+++ b/x11-misc/input-leap/metadata.xml
@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+	<maintainer type="person">
+		<email>zdanevich.vitaly@ya.ru</email>
+		<name>Vitaly Zdanevich</name>
+	</maintainer>
+	<use>
+	  <flag name="libei">
+        Enable integration with dev-libs/libei (requires patched libportal!)
+      </flag>
+	</use>
+	<upstream>
+		<remote-id type="github">input-leap/input-leap</remote-id>
+	</upstream>
+</pkgmetadata>
Author	SHA1	Message	Date
projectmoon	86d1e2e857	Update input-leap installation instructions	2024-11-07 09:20:09 +01:00
projectmoon	ab0280397c	dist-kernel 6.6.58	2024-11-02 19:45:32 +01:00
projectmoon	82ccc87397	sys-kernel/libre-kernel: 6.6.58	2024-11-02 19:42:28 +01:00
projectmoon	95239c3aa9	input leap news	2024-10-04 13:25:13 +02:00
projectmoon	eda5e2ecee	input-leap: update patch for 3.0.0	2024-10-04 12:52:12 +02:00
projectmoon	1782830001	linux-libre 6.6.51: manifest update	2024-10-02 08:34:12 +02:00
projectmoon	6f390f2036	libre-kernel: 6.6.51; drop old kernal versions	2024-10-01 23:41:26 +02:00
projectmoon	fada137cb1	sys-kernel/libre-kernel: drop 5.15.161, 5.15.163	2024-08-22 21:30:18 +02:00
projectmoon	e9913ee577	libre-kernel news	2024-08-22 13:18:38 +02:00
projectmoon	bda8616506	linux-libre 6.6.47	2024-08-21 16:36:35 +02:00
projectmoon	49f0b8eab5	libre-kernel 5.15.165	2024-08-21 16:20:59 +02:00
projectmoon	dea32190a3	input-leap: Change libei flag to wayland	2024-08-14 10:15:00 +02:00
projectmoon	84ae5a22ff	doc clarification	2024-08-11 23:58:16 +02:00
projectmoon	f443200b25	Input Leap docs	2024-08-11 23:46:12 +02:00
projectmoon	dab7e74c3d	use flag descs	2024-08-11 23:37:24 +02:00
projectmoon	970cdb947e	input-leap: add custom libportal dep	2024-08-11 23:36:42 +02:00
projectmoon	c300b72235	custom version of libportal with inputcapture	2024-08-11 23:33:16 +02:00
projectmoon	dc80b5bfd2	remov svg icon	2024-08-11 23:28:56 +02:00
projectmoon	72eb3746fe	input-leap: remove files with eapply instead	2024-08-11 23:26:25 +02:00
projectmoon	cbc9857c51	cmake_src_prepare	2024-08-11 23:19:19 +02:00
projectmoon	ab8ae28271	input-leap: remove extra icons	2024-08-11 23:16:59 +02:00
projectmoon	5d58f3fa12	input-leap: default libei use flag to off because of libportal patcehs	2024-08-11 23:02:23 +02:00
projectmoon	64773e0a37	add libei support to input-leap	2024-08-11 22:02:21 +02:00
projectmoon	d4451829db	input-leap	2024-08-11 20:18:20 +02:00
projectmoon	aee259a098	virtual/dist-kernel: add 5.15.163	2024-08-06 12:21:27 +02:00
projectmoon	5b19c41052	sys-kernel/libre-kernel: 5.15.163; drop old versions.	2024-08-06 11:24:45 +02:00
projectmoon	0b8ee1d8d0	sys-apps/purism_ectool: drop 0.3.5	2024-07-13 11:48:45 +02:00
projectmoon	ac168d7920	virtual/dist-kernel: add 5.15.161	2024-07-13 11:48:38 +02:00
projectmoon	bac924fd9d	sys-kernel/libre-kernel: add 5.15.161	2024-07-13 11:48:19 +02:00
projectmoon	fda964b4ab	libre-kernel: libre kernel 5.15.160; drop old versions	2024-06-30 07:57:37 +02:00
projectmoon	413224ca4f	update ectool to eapi 8?	2024-06-14 16:48:57 +02:00
projectmoon	36bac1cbd3	virtual/dist-kernel: add 5.15.158	2024-05-20 10:59:24 +02:00
projectmoon	a5cbe2b050	sys-kernel/libre-kernel: add 5.15.158	2024-05-20 10:55:28 +02:00
projectmoon	1435c0b624	Update ectool	2024-04-25 20:22:42 +02:00
projectmoon	54c656ddbf	linux-libre-5.15.151	2024-03-22 19:17:47 +01:00
projectmoon	af3779ee4d	New ectool version	2024-03-17 15:08:20 +01:00
projectmoon	c3c29b44a2	Add linux-sources::gentoo mask to documentation	2024-03-14 08:49:13 +01:00
projectmoon	100a1e2d40	drop old linux versions	2024-02-26 11:48:45 +01:00
projectmoon	7bd10f2e21	linux-libre 5.15.148	2024-02-26 11:47:25 +01:00
projectmoon	fc23da458a	linux-libre 5.15.147	2024-01-23 09:16:27 +01:00
projectmoon	f72a5941f9	Add that we only support kernel 5.15.x	2024-01-08 14:41:02 +01:00
projectmoon	310cf5929a	linux-libre 5.15.145	2024-01-08 09:35:33 +01:00
projectmoon	4b58378496	virtual/*: Drop unsupported kernel versions.	2024-01-08 09:33:45 +01:00
projectmoon	96e603d592	sys-kernel/libre-kernel: drop 5.15.127, 5.15.133, 5.15.135, 6.1.19, 6.1.22	2024-01-08 09:30:15 +01:00
projectmoon	e782a3e837	linux-libre 5.15.142	2023-12-14 11:11:38 -05:00
projectmoon	5805aca93e	libre-kernel 5.15.137	2023-11-13 12:16:36 +01:00
projectmoon	b2364c0f6a	libre-kernel 5.15.135	2023-10-20 12:28:01 +02:00
projectmoon	7f794e2c84	virtual/dist-kernel: fix typo	2023-10-03 09:34:44 +02:00
projectmoon	f9b55fc57c	virtual/dist-kernel: drop 5.15.114, 5.15.122	2023-10-03 09:31:42 +02:00
projectmoon	5df43cee2d	virtual/dist-kernel: add 5.15.133	2023-10-03 09:31:40 +02:00
projectmoon	d40df99db5	sys-kernel/libre-kernel: drop 5.15.114, 5.15.122	2023-10-03 09:28:44 +02:00
projectmoon	e8dfe7dc45	sys-kernel/libre-kernel: add 5.15.133	2023-10-03 09:28:21 +02:00
projectmoon	0981c9d088	virtual/linux-sources: Add r7 version with libre-kernel.	2023-09-25 21:46:48 +02:00
projectmoon	34a277adf1	www-plugins/firefox-pwa-connector: treeclean	2023-09-21 14:22:38 +02:00
projectmoon	166fc28c9c	libre-kernel 5.15.127	2023-08-22 10:45:02 +02:00
projectmoon	840535708a	drop old kernel versions	2023-07-28 11:25:48 +02:00
projectmoon	8ac787f2be	dev-python/epc: treeclean	2023-07-28 11:25:13 +02:00
projectmoon	690e2519f5	linux-libre 5.15.122	2023-07-28 11:25:04 +02:00
projectmoon	8f2f67767f	firefox-pwa-connector: 2.6.0	2023-05-31 20:17:45 +02:00
projectmoon	5029cf898b	Update libre kernel build docs	2023-05-31 19:54:08 +02:00
projectmoon	77a6b464eb	libre-kernel: 5.15.114	2023-05-31 09:35:48 +02:00
projectmoon	6adc2574b0	libre-kernel 5.15.110	2023-05-18 11:05:30 +02:00
projectmoon	3055122efc	libre-kernel 5.15.107	2023-04-30 09:16:46 +02:00
projectmoon	4764ab1f33	news update	2023-04-14 09:52:09 +02:00
projectmoon	515ef5573b	update docs for libre kernel	2023-04-14 09:46:54 +02:00
projectmoon	223caf0365	virtual/linux-sources: new package, add 3-r6	2023-04-14 09:45:29 +02:00
projectmoon	4b619a7331	virtual/dist-kernel: drop old versions, add 5.15.105 and 6.1.22	2023-04-13 20:25:28 +02:00
projectmoon	ede794c760	sys-kernel/libre-kernel: drop versions	2023-04-13 20:16:51 +02:00
projectmoon	6c3566c789	sys-kernel/libre-kernel: add 5.15.105, 6.1.22	2023-04-13 20:15:58 +02:00
projectmoon	4e3952a958	News item about fallback URIs	2023-03-29 15:59:30 +02:00
projectmoon	2664a2dc46	sys-kernel/libre-kernel: add linux-libre site as fallback for gpg keys	2023-03-29 14:00:18 +02:00
projectmoon	0ae5f901b7	sys-kernel/libre-kernel: add 6.1.19	2023-03-29 14:00:05 +02:00
projectmoon	e57750c693	www-plugins/firefox-pwa-connector: properly handle multiple versions of vendored deps	2023-03-27 14:36:00 +02:00
projectmoon	7280d559bb	www-plugins/firefox-pwa-connector: add 2.5.0	2023-03-27 14:35:04 +02:00
projectmoon	0e205bdf0c	www-plugins/firefox-pwa-connector: drop 2.4.1	2023-03-27 14:25:41 +02:00
projectmoon	645456b696	document updating virtual/dist-kernel	2023-03-23 21:01:31 +01:00
projectmoon	17f297b0bc	virtual/dist-kernel: add 5.15.102	2023-03-23 21:00:34 +01:00
projectmoon	0025e350af	www-plugins/firefox-pwa-connector: add openssl to depened/rdepend	2023-03-23 20:50:36 +01:00
projectmoon	c83055165b	sys-kernel/libre-kernel: add 5.15.102	2023-03-23 20:48:38 +01:00
projectmoon	2399f618a9	sys-kernel/libre-kernel: fallback URI for releases, drop non-amd64 arches, smarter gentoo patches discovery.	2023-03-23 20:36:22 +01:00
projectmoon	272cff5d03	sys-kernel/libre-kernel: fallback URI for kernel releases, smarter discovery of gentoo patches, drop non-amd64 arches.	2023-03-23 20:36:22 +01:00
projectmoon	0ab6bdfd3f	restrict firefox pwa build to not use gentoo mirrors	2023-03-17 17:06:43 +01:00
projectmoon	ac946b0ea2	correct docs about ectool	2023-03-16 23:05:13 +01:00
projectmoon	b16e8cd913	clarifying comment	2023-03-16 22:31:57 +01:00
projectmoon	a40dcf0d62	Switch pwa connector to use get_libdir	2023-03-16 22:31:37 +01:00
projectmoon	b6f4dfb5da	remove getlibdir	2023-03-16 22:19:07 +01:00
projectmoon	48633966c8	Remove useless comments from pwa connector ebuild	2023-03-16 22:18:47 +01:00
projectmoon	8bf03ebfa3	Missing asterisk	2023-03-16 22:13:40 +01:00
projectmoon	6cfc4c8a0f	Update and split readme	2023-03-16 22:13:13 +01:00
projectmoon	bebfa186fe	Remove dep on dev-util/cargo-make for firefox PWA connector.	2023-03-16 21:45:12 +01:00
projectmoon	aab2f80695	Document how to update PWA connector build	2023-03-16 20:09:05 +01:00
projectmoon	4c2f46e3e5	www-plugins/firefox-pwa-connector: add 2.4.1	2023-03-16 20:03:36 +01:00
projectmoon	70b340af2c	WIP on firefox-pwa-connector	2023-03-16 10:19:15 +01:00
projectmoon	f06528e6fd	sys-kernel/libre-kernel: drop versions	2023-03-08 20:51:57 +00:00
projectmoon	ad0c01120b	virtual/dist-kernel: add 5.15.94	2023-03-07 23:17:40 +00:00
projectmoon	f872aca016	sys-kernel/libre-kernel: add 5.15.94	2023-03-07 23:15:12 +00:00
projectmoon	7e312f93ff	correct email	2023-03-05 11:22:39 +00:00
projectmoon	f77273a861	rename news file	2023-03-05 11:22:04 +00:00
projectmoon	15f751a940	Add news item abou new kernel USE flag	2023-03-05 11:19:51 +00:00
projectmoon	486ef6474e	Add kernel ebuild update documentation	2023-03-05 09:07:56 +00:00
projectmoon	a8c0951e7d	sys-kernel/libre-kernel: add gentoo patches, fix config version.	2023-03-05 08:58:00 +00:00
projectmoon	59869deebb	Documentation updates about how to use the overlay (quickstart coming soon)	2023-03-01 07:42:34 +01:00
projectmoon	9bd4dbae06	Fix app category again in readme	2023-03-01 07:31:43 +01:00
projectmoon	fbad65d768	fix dep for librem-control	2023-03-01 07:12:11 +01:00
projectmoon	7cdd97c2e3	move librem-ec-acpi back to sys-kernel	2023-03-01 07:10:21 +01:00
projectmoon	faaba28f4d	sys-apps/librem-ec-acpi: add 0.9.2	2023-03-01 07:08:37 +01:00
projectmoon	77ec4be71c	newline	2023-02-28 14:30:21 +01:00
projectmoon	5faff332e8	fix librem-control dependency	2023-02-28 14:30:13 +01:00
projectmoon	6685f38faf	profiles/updates: Add move entries for librem-ec-acpi and purism_ectool	2023-02-28 14:26:14 +01:00
projectmoon	e2271fcada	Update readme for new app category	2023-02-28 14:19:23 +01:00
projectmoon	7906f2427f	sys-apps/*: Move librem-ec-acpi and purism_ectool.	2023-02-28 14:18:25 +01:00
projectmoon	f2334c522e	Update readme instructions for adding overlay	2023-02-28 14:09:11 +01:00
projectmoon	ea0c474416	minor doc update	2023-02-24 13:20:05 +01:00
projectmoon	215b66c491	libre kernel 6.1.12	2023-02-16 13:50:30 +01:00
projectmoon	dda85d4859	Revert "sys-kernel/libre-kernel: add 6.1.2" This reverts commit `25c626d60c`.	2023-02-16 13:45:15 +01:00
projectmoon	25c626d60c	sys-kernel/libre-kernel: add 6.1.2	2023-02-16 13:35:57 +01:00
projectmoon	5eb6ffb4ff	libre-kernel 5.15.88	2023-01-24 10:21:24 +01:00
projectmoon	9760b6d3c2	libre kernel 5.15.85	2022-12-28 21:01:44 +01:00
projectmoon	502256bee5	virtual/linux-sources: treeclean	2022-12-19 20:18:35 +01:00
projectmoon	e43bd67cb6	sys-kernel/libre-kernel, virtual/dist-kernel: Linux-libre 5.15.83	2022-12-19 20:17:50 +01:00
projectmoon	fccb4ef271	document python-ecp as available package	2022-12-18 23:17:49 +01:00
projectmoon	555f7fd216	dev-python/epc: prefer orjson-bin	2022-12-18 22:57:47 +01:00
projectmoon	c7a931a517	dev-python/epc: fix depend formatting	2022-12-18 22:54:49 +01:00
projectmoon	525c937c7b	dev-python/epc: allow orjson-bin dep	2022-12-18 22:52:29 +01:00
projectmoon	0f2e101f9b	dev-python/epc: new package, add 0.0.5	2022-12-18 22:47:33 +01:00
projectmoon	17f301d3c0	dev-util/rust-analyzer-bin: add 0_p20221212	2022-12-14 11:00:36 +01:00
projectmoon	64c89a82ed	virtual/dist-kernel: add 5.15.80, drop 5.19.17	2022-12-13 14:32:20 +01:00
projectmoon	e8ec8c7ce1	sys-kernel/libre-kernel: add 5.15.80	2022-12-13 14:28:45 +01:00
projectmoon	7fe53443d1	sys-kernel/libre-kernel: add verify-sig, use mirror to download source.	2022-11-24 15:44:10 +01:00
projectmoon	4f72bb9575	sec-keys/openpgp-keys-linux-libre: new package, add 20221123	2022-11-23 22:35:24 +01:00
projectmoon	ef03df67e8	sys-kernel/libre-kernel: add 5.15.77	2022-11-23 22:23:14 +01:00
projectmoon	3248a94c73	sys-kernel/libre-kernel: drop 5.15.75	2022-11-23 22:15:30 +01:00
projectmoon	c0c12e5744	Change repository to overlay in readme	2022-11-15 23:01:16 +01:00
projectmoon	7542bea7d0	only ignore md5 cache	2022-11-15 22:58:19 +01:00
projectmoon	3c33368712	Add metadata dir to gitignore	2022-11-15 22:57:45 +01:00
projectmoon	ebc954b175	Update readme about new packages.	2022-11-15 22:54:14 +01:00
projectmoon	099f831845	sys-firmware/purism_ectool: new package, add 0.3.5	2022-11-15 22:19:58 +01:00
projectmoon	be48403c98	sys-power/librem-control: unkeyword 9999 for ~amd64	2022-11-15 16:10:32 +01:00
projectmoon	cf93b01705	sys-power/librem-control: require dep on librem-ec-acpi	2022-11-15 15:59:32 +01:00
projectmoon	7f6e907164	sys-power/librem-control: new package, add 9999	2022-11-15 15:52:31 +01:00
projectmoon	cd3c2cc21a	virtual/dist-kernel: add 5.19.17	2022-11-14 15:14:08 +01:00
projectmoon	7359fc100c	virtual/dist-kernel: drop 5.10.81	2022-11-14 15:13:17 +01:00
projectmoon	c62c97027f	sys-kernel/libre-kernel: drop 5.15.75-r1, 5.15.75-r2	2022-11-14 15:12:24 +01:00
projectmoon	dbcb2d3881	sys-kernel/libre-kernel: Stabilize 5.15.75, add 5.19.17.	2022-11-14 09:13:26 +01:00
projectmoon	dde3d1aac4	remove cjk fonts that we do not know the free status of and are too lazy to check.	2022-11-10 14:51:20 +01:00
projectmoon	9922aba742	Readme update	2022-11-10 14:48:17 +01:00
projectmoon	516b974f16	media-fonts/fonts-meta: drop 3-r1	2022-11-10 14:44:20 +01:00
projectmoon	fc01fea95b	media-fonts/fonts-meta: r1	2022-11-10 14:40:46 +01:00
projectmoon	61e4c3d9ff	media-fonts/fonts-meta: new package, add 3	2022-11-10 14:21:33 +01:00
projectmoon	2f25b67385	sys-kernel/librem-ec-acpi: add kernel_linux USE check	2022-11-09 09:17:48 +01:00
projectmoon	9b67105a09	sys-kernel/librem-ec-acpi: add proper depends for distkernel	2022-11-09 09:16:19 +01:00
projectmoon	d7fe9f1fc9	Update readme	2022-11-08 17:16:00 +01:00
projectmoon	9e6ae6db11	sys-kernel/libre-kernel: correct warnings about firmware, hopefully fix version suffix.	2022-11-08 16:00:14 +01:00
projectmoon	98f731397c	sys-kernel/libre-kernel: remove 5.10.x, remove echo in 5.10.75-r1	2022-11-08 11:43:03 +01:00
projectmoon	0690e8e7d2	sys-kernel/libre-kernel: fix description and homepage.	2022-11-08 07:54:45 +01:00
projectmoon	6d6b207469	sys-kernel/libre-kernel: Fix version suffix	2022-11-07 22:17:18 +01:00
projectmoon	66af4f6efc	virtual/dist-kernel: add 5.15.75	2022-11-07 21:22:10 +01:00
projectmoon	4881ef8cc1	sys-kernel/libre-kernel: add 5.15.75	2022-11-07 21:20:37 +01:00
projectmoon	ebbe9c4dd0	libre kernel based on vanilla kernel ebuild	2021-12-25 20:31:16 -05:00
projectmoon	0332e59f40	Update dist-kernel virtual for libre-kernel	2021-11-24 14:17:15 +00:00
projectmoon	f3f5ec313c	Update ebuild for libre-kernel	2021-11-24 14:14:58 +00:00
projectmoon	51dc35c30f	move linux sources to right place	2021-11-24 14:07:37 +00:00
projectmoon	d25a833cd0	virtual for libre dist kernel	2021-11-24 14:05:49 +00:00
projectmoon	f6eafe8605	testing libre dist-kernel	2021-11-24 14:01:53 +00:00
projectmoon	03c663ad59	Add new rust analzyer	2021-09-28 07:18:05 +00:00
projectmoon	0460670c66	Remove Linux Libre kernel.	2021-09-28 07:13:44 +00:00
projectmoon	4e4d9bc80b	gnu-sources 5.10.61	2021-09-22 22:55:49 +00:00
projectmoon	4673c5c0d4	Remove libre-sources	2021-08-06 12:19:53 +02:00
projectmoon	8bd66066c8	Update readme	2021-08-06 12:02:18 +02:00
projectmoon	80ea504332	fix typo	2021-08-06 00:30:14 +02:00
projectmoon	d2cf1e04d5	fix linux libre link	2021-08-06 00:29:25 +02:00
projectmoon	f1a4f3adae	Add readme	2021-08-06 00:28:50 +02:00
projectmoon	8b552d60fb	script to find latest stable gentoo kernel version and generate gnu-sources	2021-08-05 19:54:18 +02:00
projectmoon	cbf3007b52	remove hardcoded kernel ref from gnu-sources ebuild	2021-08-05 19:53:53 +02:00
projectmoon	c1a3cf09c1	Fix manifest and download URIs for rust-analzyer	2021-08-05 08:58:57 +02:00
projectmoon	179418c592	remove bad version for rust analyzer	2021-08-05 08:48:01 +02:00
projectmoon	4b9a84f2b4	new rust-analyzer-bin 2021-08-02	2021-08-05 08:44:15 +02:00
projectmoon	2cfe5e705b	fix linux sources dir	2021-08-03 10:19:22 +02:00
projectmoon	295a656cb0	virtual linux sources with gnu sources	2021-08-03 10:16:16 +02:00
projectmoon	5a76f1b218	Update manifests for gnu-sources	2021-08-03 09:11:58 +02:00
projectmoon	977a529049	New stable gnu sources	2021-08-03 09:09:37 +02:00
projectmoon	9b11d38734	Rename libre-sources to gnu-sources	2021-08-03 09:09:09 +02:00
projectmoon	81c542288e	new rust-analyzer-bin	2021-07-26 20:41:53 +02:00
projectmoon	89f35eec15	versioned rust-analyzer build	2021-07-21 21:17:17 +02:00
projectmoon	188958a0ea	Add rust-analyzer-bin with updated manifests	2021-07-21 20:56:26 +02:00
projectmoon	b08955fb3f	fix some typos in librem-ec-acpi ebuild	2021-07-12 22:01:53 +00:00
projectmoon	441359e5e7	Compile librem-ec for user chosen kernel	2021-07-12 21:56:04 +00:00
projectmoon	4bcaa5c9f5	Librem 14 EC ACPI driver ebuild.	2021-07-09 21:28:53 +00:00
				`@ -0,0 +1 @@`
				`DIST libportal-0.7.1.tar.xz 74268 BLAKE2B b519fa88735d640a74e18cc791ec69862f136b793a7c855b1f3873cf6b15626d69088747f1a7ff54f8cd96f79e82e3df31e5349e3da57906e769b8f809f4ba34 SHA512 cbc50bfd86787fffc975fc53835acc6c3c0fd54b7ee02fce1983f1bd0fc40b15a0537780cd5e943ecedcf951840080a0f55a23a96e706223e52a6144ee70332c`
				`@ -0,0 +1 @@`
				`DIST BCB7CF877E7D47A7.asc 1213 BLAKE2B 5c7cd96062200e3419915a95977e3201299b52f35886de504cc669b5b5192519805f53301f7d70c4f0ac5a261733eb169a1372c1da1a48b0cd86a42ecbfbccae SHA512 1cc1b5bc86cf5b853e1b03f8d06e2080aadefb4b6b8af55f23a7b44afb57face718227c8401162fed2cbc394cf6fddcc65d121e313905b1acd16a4cf63d21e4b`
				`@ -0,0 +1 @@`
				`DIST librem-control-9999.tar.gz 19126 BLAKE2B e5721e04c8a7996e35aa51f40e4d56acb9f59880a8266b0d6e5c515b2a6367d628973113c9776ef7d79070d7dfeda09704686340843c835e685a93922756f841 SHA512 0d3bd3d38bc0c3f476d96214e68883a2f6ad270842b4b4922ea0f4706aaf14f188ebf08f0a23fd5524c9f8e3360aa70288b0c730d56df69b0c0f137d2694e8e7`